
The AirTAC SAID63 Double Rod Cylinder SAID63X290 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 290mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X290 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 290mm stroke. Because a carbon steel rod exits both end covers, the effective piston area is identical on extend and retract, yielding exactly 1402 N of force in both directions at 0.5 MPa. This symmetric output is ideal for mechanisms requiring consistent push and pull dynamics.
The through-rod design allows mounting a primary workpiece on one end while attaching a sensor flag, cam, or secondary drive on the opposite rear end. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE solid-state switches, though this specific configuration omits the -S magnet. The adjustable air cushions at both ends absorb kinetic energy at stroke completion.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X290 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a shuttle mechanism where the equal 1402 N push and pull forces ensure consistent momentum transfer without requiring pressure adjustments between strokes.
The twin 20mm carbon steel rods prevent piston rotation during vertical or horizontal lifting, securely guiding precision fixtures without external guide rails.
Operates a primary clamping tool on the front rod while utilizing the rear rod protrusion to physically trigger a DMSE solid-state sensor or mechanical stop.
Choose this 63mm bore model when an application demands equal 1402 N bi-directional force and inherent anti-rotation resistance that a single-rod SAI cannot provide. If your mechanism requires less force, the 50mm neighbor offers 825 N at 0.5 MPa; if more is needed, the 80mm provides 2268 N. As a true ISO 15552 profile cylinder, it offers direct dimensional interchangeability with other standard ISO 15552 double-rod units.
This 290mm stroke utilizes a G3/8 PT tapered port and a 20mm rod with an M16x1.5 thread. For strokes of 300mm or beyond, side-load and rod-bearing bending risks increase significantly; even with the dual-rod guidance, an external guide is recommended for heavy loads. Note that a plain SAID does not hold its position unpowered—air loss causes drift; use SAIL or BSAID if locking is required. Available mountings include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts rod area from both sides of the piston, it generates 1402 N of force in both extend and retract directions at 0.5 MPa, and 1962 N at 0.7 MPa.
Yes. The SAID63X290 is dimensionally interchangeable per ISO 15552 profile cylinder standards. It uses a G3/8 port and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, ensuring seamless direct replacement.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.