
The AirTAC SAID63 Double Rod Cylinder SAID63X30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 30mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 30mm stroke. Because a carbon steel rod exits both end covers, the effective piston area is identical on extend and retract, yielding exactly 1402 N of force each way at 0.5 MPa. This symmetric thrust is ideal for twin-station actuation or driving dual mechanisms simultaneously.
The through-rod design allows mounting a workpiece on one end and a position flag or cam on the opposite rear rod end. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this specific SKU lacks the -S magnet. Threaded ports are PT type, and the unit uses adjustable air cushions at both ends to decelerate the payload smoothly.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides equal 1402 N push and pull forces for mechanisms requiring identical dynamic performance in both directions without pressure compensation.
Drives two separate workstations simultaneously using both rod ends, ensuring perfectly synchronized stroke timing within a compact 30mm travel.
The twin-rod geometry prevents piston rotation, making it ideal for guiding lifts or presses where angular stability is critical.
Choose this 63mm bore when an application requires symmetric force and anti-rotation guidance that a single-rod SAI cannot provide. If your project needs less force, the 50mm neighbor offers 825 N each way at 0.5 MPa; stepping up to the 80mm bore yields 2268 N. The SAID63X30 is dimensionally interchangeable per ISO 15552, using a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) that omits the FB, CA, CB, and CR variants. Specify PT port threads and your preferred mounting accessory.
Because this is a standard double-acting cylinder, it will not hold a load if air pressure is lost or the valve is centered; the piston drifts. For position holding without live pressure, consider an external rod lock, a SAIL pneumatic lock, or the BSAID clamp-lock variant. The 30mm stroke is short and highly rigid, so side-load bending is minimal and no external guide is strictly required for standard loads.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
The SAID63X30 double-rod cylinder generates 1402 N of force in both extend and retract directions at 0.5 MPa, and 1962 N at 0.7 MPa. The twin-rod design ensures push and pull forces are exactly equal.
Yes, it is dimensionally interchangeable with ISO 15552 cylinders. It supports a specific mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, but omits the FB, CA, CB, and CR mounts used only on single-rod variants.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.