
The AirTAC SAID63 Double Rod Cylinder SAID63X325 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 325mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X325 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 325mm stroke. Because a carbon steel rod exits both end covers, the effective piston area is identical on extend and retract, yielding an equal bidirectional force of 1402 N at 0.5 MPa. This symmetric thrust makes it ideal for applications requiring consistent dynamics in both travel directions.
The twin-rod architecture provides superior anti-rotation guidance and allows a rear rod end to drive a secondary mechanism or position flag. It includes adjustable air cushions at both ends and dual-side sensor grooves. Without a magnet specified, it relies on external limit switches, though adding an -S magnet enables internal CMSE reed or DMSE solid-state sensing.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X325 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Pushes and pulls identical 1402 N loads at 0.5 MPa, ensuring stable dynamics for reciprocating shuttle mechanisms.
The twin-rod architecture prevents piston twist, guiding precision slides and lifting rigs without rotational drift.
Mounts the primary workpiece on the front rod and a secondary cam or position flag on the rear protruding rod end.
Choose this 63mm bore when you need 1402 N of force equally in both directions, stepping up from a 50mm bore (825 N) or down from an 80mm bore (2268 N). A double-rod design is preferred over a single-rod SAI when the load requires torsional rigidity, anti-rotation stability, or a rear-rod cam for secondary actuation. For this 325mm stroke, the extended length protrudes from both covers, so ensure adequate rear clearance and consider an external guide to prevent rod-bearing bending under heavy side loads.
It serves as a direct replacement for any ISO 15552 double-rod cylinder, utilizing a PT G3/8 port and a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that this cylinder does not hold its load when air pressure is lost; a SAIL or BSAID variant is required for pneumatic locking.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
The double-rod design provides equal force in both directions. It delivers 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa for both extend and retract strokes.
Yes, it is dimensionally interchangeable per ISO 15552. It uses a PT G3/8 port and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, though it omits the FB, CA, CB, and CR brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.