verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63X35

The AirTAC SAID63 Double Rod Cylinder SAID63X35 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 35mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke35 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$96.07 $103.57Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63X35

The AirTAC SAID63X35 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 35mm stroke. Because a carbon steel rod exits both end covers, the effective piston area is identical in both directions, yielding an equal extend and retract force of 1402N at 0.5MPa (or 1962N at 0.7MPa). This through-rod design provides superior anti-rotation guidance for loads compared to a single-rod SAI.

A major advantage of the twin-rod layout is the ability to mount a primary tool on the front rod end and a secondary component, such as a position flag or cam, on the rear protruding rod. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, though note this specific configuration omits the internal magnet. It operates at speeds from 30-800mm/s and uses adjustable air cushions at both ends to decelerate the piston near stroke end.

Airtac SAID63 Double Rod Cylinder SAID63X35 Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63X35
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke35 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63X35

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×35Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63X35 Is Used

sync_alt

Symmetric Force Transfer

Ideal for mechanisms requiring perfectly balanced push and pull forces, utilizing the equal annulus area on both stroke sides to move parts without speed variation.

straighten

Anti-Rotation Slides

The twin through-rods provide exceptional resistance to torsional loads, keeping guided workpieces perfectly aligned during short, repetitive clamping or lifting tasks.

settings_input_component

Rear-Mounted Cam Actuation

Drives a primary workpiece on the front rod while utilizing the rear rod end to trigger an external mechanical cam or physical limit flag for sequential control.

Is the Airtac SAID63 Double Rod Cylinder SAID63X35 the Right Cylinder?

Select this 63mm bore model when an application demands symmetric push and pull forces alongside high torsional stability. If your project requires less force, stepping down to the 50mm bore offers 825N both ways at 0.5MPa; conversely, the 80mm bore provides 2268N if your load demands more power. The SAID series uses a reduced mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits the FB, CA, CB, and CR brackets found on single-rod variants.

When replacing an existing unit, ensure you match the 35mm stroke, G3/8 PT tapered port, and required mounting interface. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 double-rod cylinders. Note that a plain SAID does not hold its position if air pressure is lost; for load-holding requirements, consider the SAIL or BSAID series instead.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63X35 FAQ

The double-rod design ensures equal force in both directions. It provides 1402N at 0.5MPa, 1962N at 0.7MPa, and 2523N at 0.9MPa, matching the pull-side figures exactly.

Yes, it is a profile cylinder dimensionally interchangeable per ISO 15552. You can use it as a direct replacement for other ISO 15552 double-rod cylinders matching the 63mm bore and 35mm stroke.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63X35

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63X35 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.