
The AirTAC SAID63 Double Rod Cylinder SAID63X35S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 35mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X35-S is a double-acting, double-rod ISO 15552 profile cylinder engineered for symmetric motion tasks. Because a rod extends from both end covers, the annulus area is identical on both sides, yielding an equal extend and retract force of 1402 N at 0.5 MPa. This through-rod geometry provides superior anti-rotation guidance compared to a single-rod SAI.
Equipped with a magnet for position sensing, this variant integrates seamlessly with AirTAC CMSE reed and DMSE solid-state switches via the dual sensor grooves machined into the extruded aluminum barrel. The standard carbon steel rods and PT tapered port threads ensure robust, leak-free operation in demanding industrial environments.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X35S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives mechanisms where equal push and pull forces are critical, preventing speed variations between extend and retract strokes.
Utilizes the dual-rod guidance to keep loads perfectly aligned and prevent torsional twisting without external guide rails.
Mounts a DMSE solid-state sensor or cam on the rear rod end to trigger secondary mechanisms while the front rod performs work.
Choose this 63 mm bore when an application demands exactly matched push and pull forces, which here both equal 1402 N at 0.5 MPa. If your mechanism requires less force, stepping down to the 50 mm bore yields 825 N both ways; if more force is needed, the 80 mm bore provides 2268 N. The twin-rod design is ideal when you need to mount a cam or position flag on the rear rod while driving the primary load on the front.
For dimensionally interchangeable direct replacements, verify the 35 mm stroke, G3/8 port, and ISO 15552 mounting interface. Note that a plain SAID cylinder does not hold its load when air pressure is lost; if position holding is required, consider the SAIL or BSAID series. Available mountings include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area on both sides, the extend and retract forces are equal. It outputs 1402 N both ways at 0.5 MPa, and 1962 N both ways at 0.7 MPa.
Yes, it is dimensionally interchangeable per ISO 15552. Just match the G3/8 PT port, 35 mm stroke, and select from the available SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.