
The AirTAC SAID63 Double Rod Cylinder SAID63X375 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 375mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X375 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 375mm stroke and a G3/8 port. Because a carbon steel rod exits both end covers, the annulus area is identical on extend and retract, yielding an equal both-way force of 1402N at 0.5MPa and 1962N at 0.7MPa. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
This through-rod architecture allows you to attach the primary workpiece on one end while mounting a position flag, cam, or secondary mechanism on the rear rod. It provides superior anti-rotation guidance for the load compared to a single-rod SAI cylinder. The adjustable air cushions at both ends absorb end-of-stroke kinetic energy to protect the moving components.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X375 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece back and forth with identical 1402N thrust in both directions, ensuring perfectly balanced cyclic motion in automated machinery.
The twin-rod guidance prevents the attached load from twisting during travel, maintaining strict parallelism for precision tooling and clamping.
Mounts a position flag or cam on the protruding rear rod end to trigger external sensors without interfering with the primary front-side work area.
Choose this 63mm bore when an application requires symmetric push and pull forces or dual-side actuation, stepping up from the 50mm bore (825N at 0.5MPa) for higher thrust. A double-rod design is preferred over a single-rod SAI when you need to prevent the load from twisting or need rear-rod sensing. For this 375mm stroke, the extended rod length means you must provide extra rear clearance and consider an external guide to prevent rod-bearing bending under heavy side loads.
This model uses a PT tapered port thread and standard carbon steel rod material. It supports mounting accessories Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Note that the air cushions only decelerate the piston near stroke end; a plain SAID does not hold a load if air pressure is lost. For position holding without live pressure, consider a SAIL or BSAID variant. It is dimensionally interchangeable per ISO 15552.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design occupies space on both sides of the piston, the effective area is equal in both directions. It provides 1402N of force at 0.5MPa, 1962N at 0.7MPa, and 2523N at 0.9MPa for both extend and retract strokes.
Yes, the SAID63X375 is dimensionally interchangeable per ISO 15552 profile standards. It can serve as a direct replacement for other ISO 15552 double-rod cylinders, utilizing the standard mounting interface and G3/8 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.