
The AirTAC SAID63 Double Rod Cylinder SAID63X40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 40mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 40mm stroke. Because a carbon steel rod exits both end covers, the effective piston area is identical in each direction, yielding exactly 1402 N of output force at 0.5 MPa on both extend and retract strokes.
This through-rod architecture allows you to mount the primary workpiece on the front end and attach a position flag or cam to the rear. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is specified later.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives loads with identical 1402 N force in both directions, ensuring perfectly balanced symmetric transfer between stations without speed discrepancies.
The twin-rod design resists torsional twisting, providing stable linear guidance for precision sliding mechanisms under offset loads.
Uses the protruding rear rod end to trigger external limit flags or secondary mechanisms while the front rod performs the primary work.
Choose this 63mm bore when an application demands equal push and pull forces alongside dual-side guidance to prevent rotation. If your mechanism requires less force, stepping down to the 50mm bore provides 825 N at 0.5 MPa, while upgrading to the 80mm bore offers 2268 N for heavier loads. The PT tapered port threads ensure a tight pneumatic seal on this G3/8 configuration.
As a dimensionally interchangeable ISO 15552 component, it serves as a direct replacement for other standard profile cylinders. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits FB, CA, CB, and CR options. Note that the adjustable air cushions only decelerate the piston near stroke end; a plain SAID will drift if air pressure is lost, so use a SAIL or BSAID lock variant if position holding is required.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area on both sides of the piston, the force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa for both extend and retract strokes.
Yes, the SAID63X40 is dimensionally interchangeable per ISO 15552 standards. It shares the exact mounting footprint of other profile cylinders and uses a G3/8 port, though it only supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting accessories.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.