verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63X425

The AirTAC SAID63 Double Rod Cylinder SAID63X425 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 425mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke425 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$145.13 $152.63Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63X425

The AirTAC SAID63X425 is a double-acting, double-rod ISO 15552 profile cylinder engineered to deliver 1402 N of force in both extend and retract directions at 0.5 MPa. Because a carbon steel rod exits both end covers, the annular piston area is identical on each side, ensuring perfectly balanced thrust and speed throughout the 425 mm travel.

This through-rod architecture allows you to mount the primary workpiece on the front end while utilizing the rear protrusion for a position flag, cam, or secondary mechanism. The extruded aluminum barrel features sensor grooves on both sides, and because no magnet is specified here, you would add an -S suffix if you need to track position with CMSE reed or DMSE electronic switches.

Airtac SAID63 Double Rod Cylinder SAID63X425 Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63X425
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke425 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63X425

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×425Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63X425 Is Used

sync_alt

Symmetric Transfer

Drives a workpiece forward and back with identical 1402 N thrust, ensuring stable symmetric transfer between machining stations.

straighten

Anti-Rotation Slide

The twin-rod geometry prevents mechanical twisting, guiding heavy vertical slides smoothly over the 425 mm travel.

settings_input_component

Rear-Cam Actuation

Uses the rear rod end to trigger a mechanical limit valve or cam while the front end performs the primary tooling task.

Is the Airtac SAID63 Double Rod Cylinder SAID63X425 the Right Cylinder?

Selecting this 63 mm bore makes sense when an application demands equal push and pull forces—here, 1402 N at 0.5 MPa or 1962 N at 0.7 MPa both ways. If your project requires less force, stepping down to the 50 mm bore yields 825 N each way, whereas moving up to the 80 mm bore provides 2268 N. The twin-rod design is specifically chosen over a single-rod SAI when you need superior anti-rotation guidance or dual-side actuation.

At 425 mm of stroke, the unsupported rod length increases; for optimal bearing life, incorporate an external guide to prevent excessive bending and side-load on the end covers. As a standard ISO 15552 profile cylinder, it drops in interchangeably with other ISO 15552 double-rod units using PT porting and the Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting set. Remember that the adjustable air cushions only decelerate the piston near stroke end; if you need to hold a load vertically without live air pressure, specify a SAIL lock cylinder or use an external pilot-operated check valve.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63X425 FAQ

Because it is a double-rod cylinder, the effective piston area is identical on both sides. It generates 1402 N of force in both the extend and retract directions at 0.5 MPa, and 1962 N at 0.7 MPa.

Yes, the SAID63X425 is dimensionally interchangeable per ISO 15552. You can drop it in as a replacement for other ISO 15552 double-rod profile cylinders, utilizing the standard PT G3/8 port and standard mounting accessories.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63X425

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63X425 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.