verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63X45

The AirTAC SAID63 Double Rod Cylinder SAID63X45 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 45mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke45 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$96.07 $103.57Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63X45

The AirTAC SAID63X45 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63 mm bore and 45 mm stroke. Because the twin rods occupy both sides of the piston, the annulus area is identical in each direction, yielding an equal extend and retract force of 1402 N at 0.5 MPa. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches.

A defining advantage of this through-rod design is the ability to mount a workpiece on the front rod end while using the protruding rear rod for a cam, position flag, or secondary mechanism. This dual-sided guidance provides superior resistance to torsion and side-load twisting compared to a single-rod SAI. The carbon steel rods and M16x1.5 rod threads offer robust load anchoring for precision transfer tasks.

Airtac SAID63 Double Rod Cylinder SAID63X45 Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63X45
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke45 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63X45

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×45Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63X45 Is Used

sync_alt

Symmetric Force Transfer

Provides exactly 1402 N of force in both extend and retract directions, ensuring perfectly balanced pushing and pulling for precision transfer assemblies.

straighten

Anti-Rotation Slides

The twin through-rods prevent mechanical twisting under offset loads, guiding tooling carriers smoothly without the torsional drift common to single-rod actuators.

precision_manufacturing

Dual-Station Actuation

Mount the primary work tool on the front rod and a secondary mechanism or position flag on the rear rod to drive or monitor two synchronized operations simultaneously.

Is the Airtac SAID63 Double Rod Cylinder SAID63X45 the Right Cylinder?

Choose this 63 mm bore over the 50 mm size (825 N at 0.5 MPa) when your application requires more than 1300 N of symmetric force, or step up to the 80 mm bore (2268 N) for heavier payloads. The double-rod architecture is selected over a single-rod cylinder when strict anti-rotation control, twin-station actuation, or rear-rod position sensing is required. Standard PT tapered port threads (G3/8) are used.

This cylinder does not hold its position or load when air pressure is lost; the piston will drift if the valve is centered or exhausted. For load-holding requirements, consider an external rod lock or the SAIL pneumatically-released lock variant. Mounting options include the reduced SAID set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). It is dimensionally interchangeable per ISO 15552 mounting interfaces.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63X45 FAQ

Because it is a double-rod cylinder, the effective piston area is the same on both sides. It delivers an equal 1402 N of force in both directions at 0.5 MPa, and 1962 N at 0.7 MPa.

Yes, the SAID63X45 is dimensionally interchangeable with other ISO 15552 profile cylinders regarding its mounting interface and footprint, ensuring easy integration into existing machinery.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63X45

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63X45 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.