verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63X475S

The AirTAC SAID63 Double Rod Cylinder SAID63X475S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 475mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke475 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$155.83 $163.33Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63X475S

The AirTAC SAID63X475-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and a 475mm stroke. Because a carbon steel rod exits both end covers, the annulus area is identical on both sides, yielding an equal extend and retract force of 1402 N at 0.5 MPa. It uses a PT tapered G3/8 port and includes a -S magnet for position sensing.

Having twin rods means you can mount the primary workpiece on the front end while utilizing the rear rod end for a cam, a secondary mechanism, or a position flag. The extruded aluminum barrel includes sensor grooves on both sides, and the -S magnet is fully compatible with AirTAC CMSE reed switches and DMSE solid-state electronic sensors for precise end-of-stroke detection.

Airtac SAID63 Double Rod Cylinder SAID63X475S Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63X475S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke475 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63X475S

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×475Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63X475S Is Used

sync_alt

Symmetric-Force Transfer

Drives a shuttle mechanism where matching push and pull speeds are critical, using the 1402 N both-way output to move payloads without deceleration imbalance.

settings_input_component

Dual-Side Actuation

Mounts a primary forming tool on the front rod and a secondary cam or limit flag on the rear protruding rod to trigger downstream sequencing.

precision_manufacturing

Anti-Rotation Slides

Utilizes the twin-rod guidance to prevent mechanical twisting during heavy clamping tasks, ensuring the workpiece stays perfectly aligned.

Is the Airtac SAID63 Double Rod Cylinder SAID63X475S the Right Cylinder?

Choose this 63mm bore when an application requires 1402 N of symmetric force in both directions and superior anti-rotation guidance compared to a single-rod SAI. If your project demands less force, the 50mm neighbor provides 825 N at 0.5 MPa; if you need more, the 80mm bore offers 2268 N. As a true ISO 15552 profile cylinder, it serves as a direct replacement for other ISO 15552 double-rod cylinders, matching the exact bore, stroke, PT G3/8 port, and mounting interface.

For a 475mm stroke, the unsupported load length increases bending stress on the rod bearings; an external guide is recommended to handle side loads. Note that the adjustable air cushions at both ends only decelerate the piston near stroke end and do not hold a load. If the system loses air pressure, the cylinder will drift; for position holding, consider an external rod lock or the BSAID clamp-lock variant. The SAID mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR).

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63X475S FAQ

It provides 1402 N of force at 0.5 MPa and 1962 N at 0.7 MPa. Because it is a double-rod cylinder, this pull-side force figure is identical for both the extend and retract strokes.

No, the adjustable air cushions only decelerate the piston at the stroke ends and do not act as a brake. Without live pressure, the piston will drift. Use a SAIL or BSAID variant for holding loads.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63X475S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63X475S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.