
The AirTAC SAID63 Double Rod Cylinder SAID63X60 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 60mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X60 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 60mm stroke. Because a carbon steel rod extends from both end covers, the effective piston area is identical in both directions, yielding an equal extend and retract force of 1402N at 0.5MPa. This through-rod design provides superior anti-rotation guidance for external loads compared to a single-rod SAI.
It features an extruded aluminum barrel with sensor grooves machined on both sides for flexible switch mounting. The rear rod end can independently drive a secondary mechanism or carry a position flag, while adjustable air cushions at both ends decelerate the piston smoothly near stroke end.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X60 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece from one rod end while the opposing rear rod end moves a secondary tool, ensuring identical push and pull forces of 1402N at 0.5MPa for balanced motion.
Utilizes the twin carbon steel rods exiting both covers to prevent mechanical rotation, providing rigid linear guidance for precision sliding fixtures.
Mounts a position flag or cam on the rear rod extension to trigger external sensors, keeping the primary work area clear of physical obstructions.
Select this 63mm bore when an application requires 1402N of symmetrical force both ways, stepping up from the 50mm bore (825N) or down from the 80mm bore (2268N). A double-rod format is chosen over a single-rod SAI when twin-station actuation or rigid anti-rotation guidance is mandatory. To match this ISO 15552 footprint, specify the 60mm stroke, G3/8 port, and a mounting accessory from the SAID set: Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Note that a plain SAID cylinder does not hold its position or load if air pressure is lost or the valve is centered; the piston will drift. Use an external pilot-operated check valve or select a BSAID clamp-lock cylinder if dead-load holding is required.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area on both sides, the push and pull forces are equal. It generates 1402N at 0.5MPa, 1962N at 0.7MPa, and 2523N at 0.9MPa in both directions.
Yes, the SAID63X60 is dimensionally interchangeable per ISO 15552. It uses a standard G3/8 port and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, making it a direct replacement for other ISO 15552 double-rod cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.