
The AirTAC SAID63 Double Rod Cylinder SAID63X65 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 65mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X65 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 65mm stroke. Because a carbon steel rod exits both end covers, the annulus area is identical on extend and retract, yielding an equal 1402 N of force in both directions at 0.5 MPa. This symmetric output is ideal for mechanisms requiring consistent push and pull dynamics.
Beyond equal force, the through-rod design allows you to mount the primary workpiece on one end and a position flag or cam on the opposite rear rod end. The extruded aluminum barrel includes sensor grooves on both sides for flexible CMSE or DMSE switch placement. It uses adjustable air cushions at both ends to decelerate the piston near stroke limits and operates efficiently within the 30-800 mm/s speed range.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X65 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives horizontal transfer arms requiring identical push and pull force, ensuring smooth, balanced motion without speed fluctuations between stroke directions.
Guides heavy vertical lifting frames with high torsional loads, using the twin-rod architecture to prevent piston rotation and maintain precise vertical alignment.
Actuates a clamping jaw on the front rod end while using the rear rod extension to trigger a DMSE solid-state sensor for end-of-stroke confirmation.
Select this 63mm bore cylinder when an application demands anti-rotation guidance or dual-side actuation that a single-rod SAI cannot provide. If your mechanism requires less force, stepping down to the 50mm bore yields 825 N both ways at 0.5 MPa. Conversely, stepping up to the 80mm bore provides 2268 N. To match this ISO 15552 footprint, specify the 63mm bore, 65mm stroke, PT G3/8 port thread, and your required mounting accessory from the SAID set: Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Note that a plain SAID cylinder does not hold its position or load when air pressure is lost or the valve is centered; the piston will drift. If your setup requires static holding without live pressure, consider an external rod lock, a SAIL pneumatic lock, or a BSAID clamp-lock cylinder. Because the rear rod protrudes from the end cover, ensure you have adequate clearance for the secondary mechanism.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the push and pull forces are equal. It delivers 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa in both directions.
Yes, it is dimensionally interchangeable per ISO 15552 profile standards. However, the SAID series uses a specific mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits the FB, CA, CB, and CR brackets found on single-rod cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.