
The AirTAC SAID63 Double Rod Cylinder SAID63X70S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 70mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X70-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 70mm stroke. Because a carbon steel rod extends from both end covers, the annulus area is identical on both sides, yielding exactly 1402 N of force in both extend and retract directions at 0.5 MPa. The -S suffix indicates an integrated magnet for position sensing.
This through-rod design allows you to mount the primary workpiece on one end and a cam, position flag, or secondary mechanism on the rear rod. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X70S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a dual-station lifting mechanism where identical 1402 N push and pull forces at 0.5 MPa ensure perfectly balanced motion without pressure disparities.
Handles a precision press operation where the twin carbon steel rods prevent mechanical drift and keep the tooling perfectly aligned during the 70mm travel.
Actuates a primary clamp on the front rod while using the rear protrusion to trigger a DMSE solid-state sensor for a secondary confirmation signal.
Choose this 63mm bore model when an application demands equal push and pull forces alongside superior anti-rotation guidance. If your mechanism requires less force, stepping down to the 50mm bore provides 825 N at 0.5 MPa, while moving up to the 80mm bore yields 2268 N. The double-rod architecture is preferred over a single-rod SAI when twin-station actuation or rear-rod sensing is required.
This cylinder uses a PT tapered port thread and operates at speeds from 30-800 mm/s. It is dimensionally interchangeable per ISO 15552 mounting interfaces. Note that the adjustable air cushions only decelerate the piston near stroke end; if the load must be held without live air pressure, consider an external rod lock or the SAIL series.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the rod occupies both sides of the piston, the effective area is equal in both directions. It provides 1402 N of force at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa for both extension and retraction.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. It supports a specific subset of mounts including Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits the FB, CA, CB, and CR brackets used only on single-rod variants.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.