verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63X85

The AirTAC SAID63 Double Rod Cylinder SAID63X85 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 85mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke85 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$102.11 $109.61Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63X85

The AirTAC SAID63X85 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and an 85mm non-standard stroke. Because a carbon steel rod extends from both end covers, the annulus area is identical on the extend and retract sides, yielding a perfectly symmetric 1402 N of thrust in each direction at 0.5 MPa.

This through-rod architecture lets you mount the primary workpiece on the front while attaching a position flag, cam, or secondary mechanism to the rear rod. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE solid-state switches, though adding a magnet requires the -S option.

Airtac SAID63 Double Rod Cylinder SAID63X85 Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63X85
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke85 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63X85

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×85Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63X85 Is Used

sync_alt

Symmetric-Force Transfer

Drives shuttle mechanisms where equal push and pull momentum is critical, utilizing the 1402 N bidirectional output to maintain consistent cycle timing.

straighten

Anti-Rotation Slides

Guides heavy vertical lifting frames with high torsional resistance, preventing load twist via the dual carbon steel rods.

settings_input_component

Through-Rod Sensing

Actuates a primary clamp on the front rod while the rear protrusion directly triggers a DMSE solid-state sensor at stroke end.

Is the Airtac SAID63 Double Rod Cylinder SAID63X85 the Right Cylinder?

Choose this 63mm bore over the smaller 50mm (825 N) when your application demands higher bidirectional force, or step up to the 80mm bore (2268 N) if thrust is insufficient. The twin-rod design is preferred over a single-rod SAI when you need superior anti-rotation guidance or dual-side actuation. Note that this 85mm stroke is a non-standard made-to-order length.

It uses a PT tapered G3/8 port and supports mounting accessories Basic, FA, LB, TC, FTC, TCM1, and TCM2. This cylinder is dimensionally interchangeable per ISO 15552. It will not hold a load if air pressure drops; use a SAIL or BSAID variant if position locking is required.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63X85 FAQ

Because the double-rod design equalizes the piston area on both sides, it provides 1402 N of force in both extend and retract directions at 0.5 MPa, scaling to 2523 N at 0.9 MPa.

Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders and supports a specific accessory set including Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63X85

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63X85 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.