
The AirTAC SAID63 Double Rod Cylinder SAID63X850 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 850mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X850 is a double-acting, double-rod ISO 15552 profile cylinder featuring a substantial 850mm stroke. Because the piston rod extends through both end covers, the annulus area is identical on both sides, yielding an equal extend and retract force of 1402N at 0.5MPa. This symmetric force capability makes it ideal for applications requiring consistent push and pull dynamics.
This model features a carbon steel rod and a PT tapered G3/8 port. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. Note that the rear rod protrudes from the back cover, requiring additional clearance space compared to a standard single-rod SAI cylinder.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X850 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a shuttle mechanism where the matching 1402N push and pull forces prevent jerky movements during direction reversal over the 850mm travel.
Uses the twin-rod guidance to keep a heavy vertical sliding platform perfectly aligned without twisting under asymmetric loads.
Mounts the primary workpiece on the front rod extension and drives a secondary cam or limit flag from the rear rod end simultaneously.
Choose this 63mm bore cylinder when an application demands 1402N of thrust in both directions over a long 850mm stroke. If you need less force, stepping down to a 50mm bore provides 825N both ways at 0.5MPa. The twin-rod design is selected over a single-rod SAI when the mechanism requires superior anti-rotation guidance, dual-side workpiece mounting, or rear-rod position flagging.
Because this is a long stroke (850mm), the 20mm rod is subjected to bending moments under side loads; an external guide bearing is highly recommended to prevent rod-bearing wear. As a double-rod variant, the SAID mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR brackets found on single-rod versions. It is dimensionally interchangeable per ISO 15552. Note that the air cushions only decelerate the piston near stroke end and do not hold the load if air pressure is lost.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because it is a double-rod cylinder, the effective area is the same on both sides. It delivers an equal force of 1402N in both extend and retract directions at 0.5MPa, and 2523N both ways at 0.9MPa.
Yes, the SAID63X850 is dimensionally interchangeable with other ISO 15552 double-rod profile cylinders. It shares the standard mounting footprint and utilizes a G3/8 port, ensuring direct compatibility.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.