
The AirTAC SAID63 Double Rod Cylinder SAID63X90 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 90mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X90 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 90mm stroke. Because a carbon steel rod extends from both end covers, the effective piston area is identical on extend and retract. This yields exactly 1402 N of output force in both directions at 0.5 MPa, eliminating speed and force discrepancies between strokes.
The through-rod design allows you to mount a primary workpiece on the front thread (M16x1.5) and a secondary cam, position flag, or sensor target on the rear. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE solid-state switches. It uses adjustable air cushions at both ends to decelerate the piston near stroke end.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X90 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a shuttle mechanism where the 1402 N push and pull forces must be perfectly matched to prevent motor overload during reversal.
Guides a heavy vertical lift carriage using both rod ends, preventing the load from twisting and binding on the linear rails.
Actuates a clamping jaw on the front while the protruding rear rod drives a physical limit flag for a DMSE solid-state sensor.
Select the SAID63X90 when an application requires equal push and pull forces, or demands higher resistance to torsional loads than a single-rod SAI can provide. If your mechanism needs less force, step down to the 50mm bore (825 N at 0.5 MPa); if moving heavier fixtures, step up to the 80mm bore (2268 N at 0.5 MPa). This model features a G3/8 port and PT tapered threads.
This double-rod unit is dimensionally interchangeable per ISO 15552, making it a direct replacement for other ISO 15552 double-rod cylinders. It supports the reduced SAID mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Note that a plain SAID does not hold its load if air pressure is lost; for fail-safe holding, consider an external rod lock or the BSAID clamp-lock series.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the force is identical in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
Yes, it is dimensionally interchangeable with ISO 15552 double-rod cylinders. It is compatible with the SAID mounting set, which includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 accessories.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.