
The AirTAC SAID63 Double Rod Cylinder SAID63X950 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 950mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X950 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 950mm stroke. Because a carbon steel rod exits both end covers, the annulus area is identical on both sides, yielding exactly 1402N of force at 0.5MPa in both extend and retract directions. This twin-rod architecture provides superior anti-rotation guidance compared to a single-rod SAI.
With a 950mm stroke exceeding the 1500mm standard maximum, this is a made-to-order unit requiring extra rear-rod clearance for the protruding back end. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed and DMSE electronic switches, while adjustable air cushions at both ends manage deceleration. It uses a G3/8 port and M16x1.5 rod threads.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X950 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer carriage with equal push and pull thrust, maintaining consistent momentum regardless of travel direction.
Mounts a primary workpiece on the front rod end and a secondary cam or mechanism on the rear rod to sequence two operations simultaneously.
Uses the dual carbon steel rods exiting both covers to guide heavy loads over 950mm without twisting, replacing external guides in linear slides.
Choose this 63mm bore when an application requires 1402N of symmetric force at 0.5MPa and extensive 950mm travel. If you need less force, step down to the 50mm bore which provides 825N each way. If your mechanism demands higher thrust, the 80mm bore yields 2268N. The double-rod design is selected over a single-rod SAI when a rear cam, position flag, or secondary tool must be driven from the back end, or when strict resistance to torsion is required.
This 950mm stroke is non-standard and made-to-order. Because the stroke is over 300mm, the long unsupported piston rod is highly susceptible to side-load bending; an external guide rail should be used to prevent rod-bearing damage. Note that this cylinder will drift if air pressure is lost; for load-holding without live pressure, consider an external rod lock or the BSAID clamp-lock variant. It is dimensionally interchangeable per ISO 15552 with a PT tapered G3/8 port, and uses the SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design occupies volume on both sides of the piston, the effective area is equal in both directions. It provides 1402N of force at 0.5MPa, 1962N at 0.7MPa, and 2523N at 0.9MPa for both extend and retract strokes.
Yes, the SAID63X950 is a profile cylinder dimensionally interchangeable per ISO 15552. It serves as a direct replacement for other ISO 15552 double-rod cylinders, matching the standard 63mm bore footprint and G3/8 port interface.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.