Airtac SAID80 Double Rod Cylinder SAID80BX10S
The AirTAC Airtac SAID80 Double Rod Cylinder SAID80BX10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 10mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke10 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID80 Double Rod Cylinder SAID80BX10S
The AirTAC SAID80X10-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10 mm stroke and an 80 mm bore. Because a SUS304 stainless steel rod exits both end covers, the annular piston area is identical on extend and retract. This yields exactly 2268 N of force in both directions at 0.5 MPa, ensuring perfectly symmetric motion control.
Equipped with a magnet for position sensing, the -S variant supports AirTAC CMSE reed and DMSE electronic switches fitted into the dual-side sensor grooves. The short 10 mm stroke is ideal for high-cycle clamping or indexing, while the PT tapered ports (G3/8) match standard regional pneumatic fittings.
Airtac SAID80 Double Rod Cylinder SAID80BX10S Technical Specifications
| Model | Airtac SAID80 Double Rod Cylinder SAID80BX10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID80 Double Rod Cylinder SAID80BX10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID80 Double Rod Cylinder SAID80BX10S Is Used
Short-Stroke Clamping
Provides 2268 N of equal bidirectional force for precision clamping tasks where the 10 mm stroke rapidly indexes parts without rotational drift.
Symmetric Force Transfer
Drives dual-side mechanisms where the matching extend and retract speeds prevent jerk, utilizing the twin SUS304 rods for stable through-motion.
Dual-End Actuation
Mounts a primary work tool on the front rod while using the rear rod end to trigger CMSE/DMSE sensors or operate a secondary latch simultaneously.
Is the Airtac SAID80 Double Rod Cylinder SAID80BX10S the Right Cylinder?
Select this 80 mm bore double-rod cylinder when an application demands equal push and pull forces—2268 N at 0.5 MPa—and exceptional anti-rotation guidance over a very short 10 mm stroke. Stepping down to a 63 mm bore drops the both-way force to 1402 N, whereas upgrading to a 100 mm bore increases it to 3681 N. Choose the SAID twin-rod design over a single-rod SAI when you need to mount a workpiece on one end and a cam or position flag on the rear protruding rod.
As a true ISO 15552 profile cylinder, it provides a drop-in replacement for other ISO 15552 double-rod cylinders without altering mounting dimensions. The standard mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. For position holding without air pressure, consider an external rod lock or the BSAID clamp-lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID80 Double Rod Cylinder SAID80BX10S FAQ
Because the double-rod design subtracts the rod area from both sides of the piston, the force is equal in both directions. It delivers 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa.
Yes, the SAID80X10-S is an extruded aluminum profile cylinder built to ISO 15552 mounting interface dimensions, making it fully interchangeable with other ISO 15552 double-rod cylinders of the same bore and stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID80 Double Rod Cylinder SAID80BX10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.