Airtac SAID80 Double Rod Cylinder SAID80X10S
The AirTAC Airtac SAID80 Double Rod Cylinder SAID80X10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 10mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke10 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID80 Double Rod Cylinder SAID80X10S
The AirTAC SAID80X10-S is a double-acting, double-rod ISO 15552 profile cylinder with a 80 mm bore and 10 mm stroke. Because a carbon steel rod exits both end covers, the annular piston area is identical on extend and retract, yielding an equal 2268 N of force each way at 0.5 MPa. The integrated -S magnet supports position sensing via CMSE reed or DMSE solid-state switches in the dual side grooves.
This short-stroke design is ideal for mounting a workpiece on the front rod end while using the rear protrusion for a cam or limit flag. It uses adjustable air cushions at both ends to decelerate the piston near stroke limits, but note that exhausting the air supply will cause the piston to drift, as the cushion is not a locking mechanism.
Airtac SAID80 Double Rod Cylinder SAID80X10S Technical Specifications
| Model | Airtac SAID80 Double Rod Cylinder SAID80X10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID80 Double Rod Cylinder SAID80X10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID80 Double Rod Cylinder SAID80X10S Is Used
Symmetric Force Transfer
Drives a push-pull transfer mechanism where equal 2268 N thrust is required in both directions without speed variation.
Dual-Station Actuation
Mounts a primary workpiece on the front rod and a secondary cam on the rear rod to time two separate machine actions simultaneously.
Anti-Rotation Slides
Uses the twin-rod guidance to prevent piston rotation during short 10 mm clamping strokes on precision alignment jigs.
Is the Airtac SAID80 Double Rod Cylinder SAID80X10S the Right Cylinder?
Select this 80 mm bore model when an application requires symmetric thrust and dual-side guidance, stepping up from the 63 mm bore which provides 1402 N at 0.5 MPa. The SAID80X10-S is chosen over a single-rod SAI when a rear rod is needed for secondary mechanism actuation or anti-rotation stability. It features PT tapered ports and a true ISO 15552 mounting interface, accepting Basic, FA, LB, TC, FTC, TCM1, and TCM2 accessories. For applications requiring position holding upon air loss, consider the SAIL or BSAID clamp-lock variants instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID80 Double Rod Cylinder SAID80X10S FAQ
The SAID80X10-S provides equal force in both extend and retract directions due to the double-rod design. It delivers 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa.
Yes, the SAID80X10-S is dimensionally interchangeable per ISO 15552 mounting interfaces. It uses a standard extruded aluminum profile and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, though it omits FB and CA styles.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID80 Double Rod Cylinder SAID80X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.