Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000S-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 1000mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke1000 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000S-10A
The AirTAC SAIF100X1000S-10A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This built-in valve provides an effective flow area of 30.0 mm2 (Cv 1.68) and operates at a maximum frequency of 4 cycles per second. Equipped with a carbon steel piston rod and a magnet for CMSE or DMSE sensors, it is driven by an AC220V terminal entry coil drawing 3.5 VA with an IP65 rating and a 0.05s activation time. Because the valve manifold routes air internally via a PU tube (O10 x O6.5), you eliminate remote plumbing and save panel space.
While the bare cylinder rates to 1.0 MPa, the practical operating range for this valved assembly is 0.15-0.8 MPa, supporting speeds of 30-800 mm/s. In its factory setting, the rod retracts when the coil is energised, but you can reconfigure the valve to extend-when-energised. At 0.5 MPa it generates 3927 N of push force and 3681 N of pull force, making it a robust choice for heavy decentralized automation tasks.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×1000 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000S-10A Is Used
Decentralized Heavy Automation
Distributes heavy lifting across large machines without needing a central valve island, simplifying installation.
Space-Constrained Pressing
Provides 3927 N of push force in tight retrofits where running separate valve tubing is impossible.
Long-Stroke Material Handling
Drives 1000mm strokes for heavy product diversion using a self-contained pneumatic assembly.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000S-10A the Right Choice?
Select this 100mm bore model when your application requires substantial thrust, as stepping down to an 80mm bore drops the 0.5 MPa push force to 2513 N. The SAIF100X1000S-10A excels in large machines where running separate valve tubing is costly; it switches itself from a single AC220V terminal signal. The valve uses a PT 3/8 port, while the cylinder features a PT 1/2 port. Remember that the built-in 5/2 valve routes air but does not hold the load without live pressure; for true load-holding, consider the SAIL lock series. When ordering replacements, verify the 1000mm stroke, 10 valve port, AC220V voltage, terminal entry, PT thread, and the -S magnet.
Because the 1000mm stroke is long, always account for side-loading and use external guide rails to prevent rod damage and premature seal wear.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000S-10A FAQ
It delivers a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. The built-in 4M310-10 valve has a 30.0 mm2 orifice with a Cv of 1.68.
No remote valve is needed as the cylinder switches itself from one AC220V coil signal. The factory setting retracts the rod when energised, but you can reposition the valve to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.