Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 600mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke600 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10A
The AirTAC SAIF100X600S-10A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This built-in valve provides an effective flow of 30.0 mm2 (Cv 1.68) and mounts directly via a manifold block using O10 x O6.5 PU tubing. Equipped with a magnet for position sensing, it supports CMSE reed and DMSE electronic sensors. The unit operates on an AC220V terminal coil consuming 3.5 VA, protected to IP65 with a 0.05 s activation time.
Because the 5/2 valve limits operating pressure to 0.15-0.8 MPa, this defines the practical working range for the assembly, even though the bare cylinder rates to 1.0 MPa. Delivering 3927 N of push force at 0.5 MPa, it eliminates remote plumbing by switching itself from one coil signal. Factory set to retract when energised, the valve can be repositioned to extend upon energising, ideal for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×600 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10A Is Used
Decentralized Automation
Ideal for large-scale factory lines where running individual valve tubing back to a central manifold is costly and complex, thanks to its self-contained 5/2 valve architecture.
Heavy Material Handling
Provides robust 3927 N push force at 0.5 MPa for moving heavy pallets or workpieces, while the 600mm stroke accommodates long transfer distances.
Retrofit Upgrades
Perfect for machine retrofits where adding a new remote valve island is impractical, as the integrated terminal coil requires only a single electrical signal to operate.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10A the Right Choice?
Choose this 100mm bore when substantial thrust is required, delivering 3927 N push at 0.5 MPa. If your application needs less force, stepping down to the 80mm bore yields 2513 N push at 0.5 MPa, optimizing air consumption. The self-contained SAIF design beats a separate cylinder and remote valve by drastically reducing panel space and tubing runs in decentralized installations. Remember that the 5/2 valve routes air but does not lock the load; for position holding under zero pressure, consider the SAIL lock series. When ordering, match the 600mm stroke, 3/8" valve port, PT cylinder port, AC220V terminal coil, and -S magnet. For this 600mm stroke, ensure external guide rods are used to prevent excessive side loading and premature seal wear.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10A FAQ
The 100mm bore cylinder provides 3927 N of push force and 3681 N of pull force at 0.5 MPa. The integrated 4M310-10 5/2 valve has a 30.0 mm2 orifice with a Cv of 1.68, supporting a max frequency of 4 cycles/sec.
Yes. The factory setting retracts the piston rod when the AC220V coil is energised, but you can reposition the 5/2 valve on the manifold to extend the rod upon energising. This self-contained switching removes the need for a separate remote valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.