Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-10B is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 80mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke80 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-10B
The AirTAC SAIF100X80-10B is a double-acting ISO 15552 profile cylinder featuring a built-in 4M310-10 5/2 solenoid valve. This integrated valve provides a 30.0 mm2 orifice (Cv 1.68) and operates via a DC24V terminal coil drawing 3.0 W. Because the valve manifold limits the pneumatic path, the practical operating pressure for the assembled SAIF unit is 0.15-0.8 MPa, even though the cylinder body rates to 1.0 MPa. At 0.5 MPa, this 100mm bore generates 3927N of push force and 3681N of pull force.
By integrating the valve directly onto the manifold block using O10 x O6.5 PU tubing, this unit eliminates remote plumbing and saves panel space for decentralized machine stations. Driven by a 5/2 internally piloted valve, the factory setting retracts the rod when the coil is energised, but you can reposition the valve to extend-when-energised. The assembly operates at 30-800 mm/s and the IP65 coil responds in 0.05 s or less.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×80 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-10B Is Used
Decentralized Automation Stations
Eliminates the need for long tubing runs to a central panel by switching directly from the integrated DC24V coil, saving wiring and space across large factory layouts.
High-Force Clamping
Delivers 3927N of push force at 0.5 MPa, making it suitable for heavy-duty clamping and holding operations within compact machinery envelopes.
Machine Retrofitting
Ideal for upgrading existing ISO 15552 interchangeable profile cylinders where adding a separate 5/2 valve and manifold would be structurally difficult.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-10B the Right Choice?
Choose this 100mm bore when you need maximum thrust in the SAIF range; stepping down to an 80mm bore yields 2513N push at 0.5 MPa, while this 100mm bore is the top tier. The SAIF100X80-10B is ideal for large machines where running separate valve tubing is costly, as the integrated 4M310-10 valve switches the cylinder from a single DC24V terminal signal. Ensure your replacement matches the 100mm bore, 80mm stroke, PT3/8 cylinder port, 3/8 valve port, DC24V voltage, and terminal entry. Since this is a 5/2 valve, it routes air but does not hold the load without live pressure; for position holding, consider the SAIL lock series. Strokes under 300mm avoid significant side-load concerns.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-10B FAQ
The 100mm bore provides 3927N push and 3681N pull force at 0.5 MPa. The built-in 4M310-10 valve offers a 30.0 mm2 effective area (Cv 1.68) with a maximum frequency of 4 cycles per second.
Yes. The factory setting retracts the rod when the DC24V coil is energised, but you can reposition the 5/2 valve on the manifold to extend-when-energised. This self-contained switching eliminates the need for a separate remote valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.