Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10B is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 80mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke80 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10B
The AirTAC SAIF100X80S-10B is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M310-10 5/2 solenoid valve, delivering a robust 3927N push force at 0.5 MPa. Driven by a DC24V terminal coil consuming 3.0W with IP65 protection, it integrates controls directly on the actuator. While the bare cylinder rates to 1.0 MPa, the integrated valve limits the practical working range to 0.15-0.8 MPa.
This decentralized design eliminates remote valve plumbing and saves panel space. The manifold connects the valve to the cylinder via PU tubing (O10 x O6.5). Factory set to retract the rod when energised, the valve can be repositioned for extend-when-energised operation. The -S magnet supports CMSE reed and DMSE electronic sensors.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×80 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10B Is Used
Decentralized Assembly Lines
Eliminates the need for long air lines from a central control panel by driving the 100mm bore directly from a local DC24V signal.
Heavy Material Handling
Leverages 3927N of push force at 0.5 MPa to move substantial jigs or parts within compact machine footprints.
Retrofit Automation
Ideal for upgrading existing ISO 15552 fixtures where routing new pneumatic tubing to a remote valve is costly.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10B the Right Choice?
Choose this 100mm bore when 50mm (982N push at 0.5 MPa) or 80mm (2513N push) actuators lack the force for heavy handling. The self-valved SAIF excels over separate cylinder and valve setups in space-tight machines, cutting tubing and wiring across large layouts. Note that the 5/2 valve routes air but does not lock the load; use SAIL for holding.
When ordering a replacement, match the 100mm bore, 80mm stroke, PT3/8 valve port code 10, DC24V voltage, terminal entry, PT thread, and the -S magnet. The cylinder port is PT1/2. At 80mm stroke, side-load guides are not strictly required, but standard mount rules apply.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10B FAQ
The 100mm bore generates 3927N push and 3681N pull force at 0.5 MPa. The built-in 4M310-10 valve provides an effective area of 30.0 mm2 (Cv 1.68) with a max frequency of 4 cycles/sec.
The 5/2 valve routes air but does not lock the load. It operates on DC24V (3.0W, IP65) via a terminal entry. Factory-set to retract when energised, it can be repositioned to extend when energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.