Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06F
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06F is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 150mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke150 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC12V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06F
The AirTAC SAIF32X150S-06F is a double-acting profile cylinder with a built-in 4M210-06 5/2 solenoid valve, delivering a 0.78 Cv flow rate. It features a 32mm bore, 150mm stroke, and a carbon steel piston rod. Equipped with a magnet for position sensing, it supports AirTAC CMSE reed and DMSE electronic sensors. The DC12V terminal coil consumes 3.0W and carries an IP65 rating.
Because the cylinder rates to 1.0MPa but the integrated valve operates at 0.15-0.8MPa, the practical working range for this assembled unit is 0.15-0.8MPa. The factory setting retracts the rod when the coil is energised, but you can reposition the valve to extend-when-energised. This self-contained design eliminates remote valves and extra tubing, making it ideal for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06F Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06F |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC12V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06F
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×150 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| F | Coil voltage DC12V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06F Is Used
Decentralized Stations
Ideal for large machines with decentralized stations, where a single DC12V coil signal drives the cylinder without remote plumbing.
Space-Tight Machines
The built-in 4M210 valve saves panel space and eliminates extra PU tubing, fitting perfectly into compact 32mm bore assemblies.
Retrofit Upgrades
Great for retrofits where running new valve tubing is costly; the integrated manifold block handles switching directly on the cylinder.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06F the Right Choice?
Choose this 32mm bore model when 402N push force at 0.5MPa is sufficient; step up to the 40mm bore if you need 628N. The SAIF32X150S-06F is perfect for space-tight machines where running separate valve tubing is costly. It features a PT1/8 cylinder port and a 1/8 valve port. For replacements, match the 32mm bore, 150mm stroke, 4M210-06 valve, DC12V terminal coil, PT thread, and -S magnet. Since the stroke is under 300mm, side-load guide considerations are minimal.
Note that the 5/2 valve routes air but does not hold the load without live pressure. For true load-holding, consider the SAIL lock or BSAI clamp-lock series. The air cushion only decelerates near stroke end.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06F FAQ
The 32mm bore provides 402N push and 345N pull force at 0.5MPa. The built-in 4M210-06 valve has a 14.0mm2 orifice with a 0.78 Cv flow rate.
Yes. The factory setting retracts the rod when the DC12V coil is energised, but you can reposition the valve to extend-when-energised. No separate remote valve is needed.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06F
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.