Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06A is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 175mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke175 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06A
The AirTAC SAIF32X175S-06A is a double-acting profile cylinder with a built-in 4M210-06 5/2 solenoid valve, delivering a Cv of 0.78 and a 14.0 mm2 orifice. It features an AC220V coil with terminal entry, consuming 3.5 VA and responding in 0.05 s. The integrated manifold uses an O8 x O5 PU tube to bridge the valve and cylinder. Because the valve operates at 0.15-0.8 MPa, this assembled unit's practical working pressure is 0.15-0.8 MPa, even though the bare cylinder rates to 1.0 MPa.
This 32 mm bore generates 402 N of push force at 0.5 MPa and includes a magnet for CMSE reed and DMSE electronic sensors. By default, the piston rod retracts when the coil is energised; repositioning the valve reconfigures it to extend-when-energised. It switches itself from one coil signal, eliminating remote valves and making it ideal for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×175 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06A Is Used
Decentralized Assembly Stations
Eliminates the need for a central valve manifold, allowing independent control of clamping operations directly at the workstation.
Space-Constrained Machinery
The built-in valve manifold saves valuable panel space and reduces the amount of external plumbing required in tight equipment layouts.
Retrofit Automation Upgrades
Ideal for upgrading older machines where routing new pneumatic lines back to a main control cabinet is costly or impractical.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06A the Right Choice?
Choose this self-valved SAIF32X175S-06A when you need compact, decentralized actuation without running separate valve tubing. If your application requires higher thrust, stepping up to a 40 mm bore increases push force to 628 N at 0.5 MPa. The 175 mm stroke is well within the 1000 mm standard maximum, but for any stroke over 300 mm, ensure you use a guide to prevent excessive side-load on the rod.
Remember that the built-in 5/2 valve routes air but does not lock the load without live pressure; for true position holding, consider the SAIL lock series. To replace this unit, match the 32 mm bore, 175 mm stroke, 1/8" cylinder port, 06 (1/8") valve port, AC220V terminal coil, PT thread, and the -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06A FAQ
The 32 mm bore generates 402 N of push force at 0.5 MPa. The built-in 4M210-06 valve provides an effective area of 14.0 mm2 (Cv 0.78) and operates at a maximum frequency of 5 cycles per second.
No separate remote valve is needed; the AC220V terminal coil drives the cylinder directly. Factory setting retracts the rod when energised, but repositioning the valve changes it to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.