Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06A is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 200mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke200 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06A
The AirTAC SAIF32X200-06A is a double-acting ISO 15552 profile cylinder featuring a built-in 4M210-06 5/2 solenoid valve. This specific configuration pairs a PT1/8 cylinder port with a 1/8 valve port, utilizing an O8xO5 PU tube to bridge the manifold and cylinder. Driven by an AC220V terminal coil drawing 3.5 VA, it delivers a 0.05s activation time within an IP65 rated enclosure. Because the integrated valve operates at 0.15-0.8 MPa, this defines the practical working pressure for the assembled unit, despite the bare cylinder rating of 1.0 MPa.
Generating 402N of push force at 0.5 MPa, this 32mm bore unit is designed for self-switching duty. From the factory, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised if the logic demands it. By controlling itself from a single coil signal, it eliminates remote plumbing and panel hardware, making it highly effective for decentralized stations across large machines.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×200 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06A Is Used
Decentralized Assembly Stations
Ideal for distributing actuation across large machines, eliminating the need to run long valve tubing back to a central control panel.
Compact Clamping Fixtures
Provides 402N of push force at 0.5 MPa in tight spaces where mounting a separate 5/2 valve and manifold block is physically impossible.
Wiring Retrofit Upgrades
Perfect for upgrading older pneumatic lines, requiring only a single AC220V electrical signal to drive the cylinder rather than new air plumbing.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06A the Right Choice?
Choose this self-valved SAIF32X200-06A when a decentralized 32mm bore actuator is needed, as stepping down is not an option for smaller footprints. If your application requires greater thrust, the neighbouring 40mm bore provides 628N of push force at 0.5 MPa. This integrated design outperforms a separate cylinder and remote valve setup by cutting tubing runs and saving panel space, particularly in retrofits where adding air lines is costly. The 200mm stroke on this model is well below the 1000mm maximum, but always ensure adequate guide support to manage side loads.
When specifying a replacement, confirm the 32mm bore, 200mm stroke, 1/8 valve port, AC220V voltage, terminal entry, and PT thread. Because the -S magnet option is absent here, position sensing via CMSE reed or DMSE electronic switches is not supported without modification. Remember that the 5/2 valve and air cushions decelerate the load near stroke end but do not lock it; for true position holding, look to the SAIL lock or BSAI clamp-lock series.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06A FAQ
The 32mm bore generates 402N push and 345N pull force at 0.5 MPa. The integrated 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78) and a maximum frequency of 5 cycles per second.
No, the SAIF32X200-06A has a built-in 4M210 5/2 valve driven by an AC220V terminal coil. By default, the rod retracts when energised, but it can be reconfigured to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.