Airtac SAIF Series Standard Cylinder with Valve SAIF32X300-06A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X300-06A is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 300mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke300 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X300-06A
The AirTAC SAIF32X300-06A is a double-acting profile cylinder featuring a built-in 4M210-06 5/2 solenoid valve. Driven by an AC220V terminal coil consuming 3.5 VA, it eliminates the need for a separate remote valve, saving panel space and tubing in decentralized machine stations. The integrated valve offers a 14.0 mm2 effective area (Cv 0.78) and switches at up to 5 cycles per second.
While the base ISO 15552 cylinder body rates to 1.0 MPa, the practical operating range for this valved assembly is 0.15-0.8 MPa. At 0.5 MPa it delivers 402 N of push force. The manifold connects to the cylinder via an O8 x O5 PU tube, and the valve port (1/8") is distinct from the cylinder port. Factory-set to retract when energised, the valve can be repositioned to extend on signal.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X300-06A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X300-06A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X300-06A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×300 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X300-06A Is Used
Decentralized Assembly Lines
Ideal for large factory layouts where local cylinder control saves pneumatic tubing and panel space.
Compact Machine Integration
Fits into tight equipment envelopes by bundling the actuator and 5/2 valve into one assembly.
Retrofit & Upgrade Kits
Perfect for upgrading older machines to self-switching cylinders without adding external valve banks.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X300-06A the Right Choice?
Choose this self-valved SAIF unit when decentralizing pneumatics across large machines, as running separate valve tubing is costly. If your application requires greater thrust, stepping up to the 40 bore yields 628 N push force at 0.5 MPa. For this 300 mm stroke, add an external guide to prevent rod side-load wear. To replace this unit, match the 32mm bore, 300mm stroke, 1/8" valve port, AC220V terminal coil, PT thread, and no magnet. Note that the 5/2 valve routes air but does not lock; for position holding, consider SAIL or BSAI.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X300-06A FAQ
At 0.5 MPa, this 32mm bore cylinder provides 402 N of push force and 345 N of pull force. The built-in 4M210-06 valve has a 14.0 mm2 orifice with a Cv of 0.78.
No separate remote valve is needed; the integrated 5/2 solenoid handles switching from a single AC220V signal. The factory setting retracts the rod when energised, but you can reposition the valve to extend when energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X300-06A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.