Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06C
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06C is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 500mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke500 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC110V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06C
The AirTAC SAIF32X500S-06C is a double-acting ISO 15552 profile cylinder featuring an integrated 4M210-06 5/2 solenoid valve. Driven by an AC110V terminal entry coil drawing 3.5 VA, it delivers a Cv of 0.78 with a 14.0 mm2 orifice. The carbon steel piston rod and built-in magnet for CMSE reed or DMSE electronic sensors make it highly adaptable. While the cylinder body itself rates to 1.0 MPa, the operating pressure for the assembled valved unit is 0.15-0.8 MPa.
By switching itself from a single coil signal, this unit eliminates remote valves and excess tubing, making it perfect for decentralized stations. The manifold connects to the cylinder via O8 x O5 PU tubing. Factory-set to retract when energised, the valve can be repositioned to extend on signal. It yields 402N push and 345N pull force at 0.5 MPa.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06C Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06C |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC110V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06C
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×500 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| C | Coil voltage AC110V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06C Is Used
Decentralized Stations
Ideal for large machines with multiple nodes, eliminating long tubing runs by switching locally via the AC110V coil.
Space-Tight Actuators
The integrated 4M210 valve manifold saves valuable panel space in compact automation fixtures.
Sensor-Ready Sorting
The -S magnet enables precise position detection with CMSE or DMSE switches along the 500mm stroke.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06C the Right Choice?
Choose this 32mm bore when you need compact 402N thrust at 0.5 MPa; step up to the 40mm bore if your application requires 628N push force. The self-valved SAIF design beats a separate cylinder plus remote valve in space-tight machines by cutting panel space and wiring. For this 500mm stroke, adding external guide rails is recommended to prevent side-load damage and rod binding over extended travel. The 4M210-06 valve handles up to 5 cycles per second.
This assembly does not hold load without live pressure, as the 5/2 valve routes air rather than locking it; explore the SAIL series if pneumatic locking is required. To replace this unit, match the 32mm bore, 500mm stroke, PT1/8 cylinder port, 4M210-06 valve (1/8" port), AC110V terminal coil, PT thread, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06C FAQ
At 0.5 MPa, this 32mm bore cylinder provides 402N push and 345N pull force. The integrated 4M210-06 5/2 valve has an effective area of 14.0 mm2 and a Cv of 0.78.
No, the integrated 4M210 valve switches the cylinder directly from the AC110V terminal coil signal. It is factory-set to retract when energised but can be repositioned to extend when energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06C
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.