Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06F
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06F is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 500mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke500 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC12V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06F
The AirTAC SAIF32X500S-06F is a double-acting ISO 15552 profile cylinder paired with a built-in 4M210-06 5/2 solenoid valve, offering an effective flow of 14.0 mm2 (Cv 0.78). Driven by a DC12V terminal coil drawing 3.0 W, it integrates pneumatic and electrical control into one assembly. While the cylinder body rates to 1.0 MPa, the internal piloted valve limits the practical operating range to 0.15-0.8 MPa.
This 32mm bore generates 402N of push force at 0.5 MPa. The manifold links the valve to the cylinder via an O8 x O5 PU tube, meaning the 1/8" valve port and 1/8" cylinder port are distinct connections. Factory-set to retract the rod when energised, the valve can be repositioned to extend on signal. The -S magnet works with CMSE reed and DMSE electronic sensors.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06F Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06F |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC12V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06F
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×500 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| F | Coil voltage DC12V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06F Is Used
Decentralized Machine Stations
Eliminates the need to run long valve tubing from a central panel, driving localized cylinder control directly at the station.
Compact Assembly Automation
Saves valuable panel space by bundling the 5/2 valve and cylinder, fitting neatly into tight machine frames.
Low-Voltage Retrofitting
The DC12V terminal coil is suited for low-voltage control systems where standard AC power is impractical or unsafe.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06F the Right Choice?
Choose this self-valved unit to eliminate remote valve plumbing and panel space, making it ideal for decentralized stations across large machines. If your application requires more force, stepping up to the 40mm bore yields 628N push at 0.5 MPa. For load-holding needs, note that the 5/2 valve routes air but does not lock position; consider the SAIL lock cylinder instead.
With a 500mm stroke, ensure adequate guidance to prevent rod side-loading and premature wear. To replace this unit, match the 32mm bore, 500mm stroke, 1/8" valve port, DC12V terminal coil, PT thread, and -S magnet specification.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06F FAQ
The built-in 4M210-06 valve has a 14.0 mm2 orifice (Cv 0.78). The 32mm bore cylinder generates 402N of push force and 345N of pull force at 0.5 MPa.
Yes. The factory setting retracts the piston rod when the DC12V coil is energised, but you can reposition the valve on the manifold to extend-when-energised. It holds position pneumatically by pilot pressure, not by a mechanical spring.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X500S-06F
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.