Airtac SAIF Series Standard Cylinder with Valve SAIF32X75-06B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X75-06B is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 75mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke75 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75-06B
The AirTAC SAIF32X75-06B is a double-acting ISO 15552 profile cylinder with a built-in 4M210-06 5/2 solenoid valve. Driven by a DC24V terminal entry coil drawing 3.0 W, it delivers a Cv of 0.78 and pushes with 402N at 0.5 MPa. The cylinder port is PT1/8, while the valve port is 1/8. Because the manifold block links the valve to the barrel via O8xO5 PU tubing, it switches itself from one electrical signal, eliminating remote plumbing.
The cylinder body rates to 1.0 MPa, but the practical operating range for this valved unit is 0.15-0.8 MPa. Factory-set to retract the rod when the coil is energised, the valve can be repositioned to extend-when-energised if your machine logic requires it. This decentralized design saves panel space and tubing runs across large installations.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X75-06B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X75-06B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X75-06B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×75 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75-06B Is Used
Decentralized Assembly Stations
Eliminates the need for a central valve manifold, allowing independent 24V DC control of small 32mm clamping actuators directly at the workstation.
Compact Sorting Diverters
Provides self-switching action for lightweight package routing, saving valuable panel space while delivering 345N of pull force at 0.5 MPa.
Machine Retrofitting
Ideal for upgrading older machines where adding long air tubes to a remote valve is difficult; the built-in manifold simplifies installation.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75-06B the Right Choice?
Choose the 32mm bore when 402N of push force at 0.5 MPa is sufficient; step up to the 40mm bore (628N push) if moving heavier jigs. The SAIF32X75-06B suits tight machine layouts where running a separate remote valve and air tubing is costly or impractical. The DC24V terminal coil offers IP65 protection and a 0.05s response time, ideal for low-voltage control panels.
When specifying a replacement, match the 75mm stroke, 1/8 valve port, PT1/8 cylinder port, DC24V voltage, terminal entry, and standard carbon steel rod. Note that the 5/2 valve routes air and the end cushions only decelerate the piston near stroke end; neither function locks the load. For position holding, consider an AirTAC SAIL lock cylinder. Stroke is under 300mm, so side-load guides are less critical but still recommended for rigid mounting.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X75-06B FAQ
At 0.5 MPa, this 32mm bore cylinder provides 402N of push force and 345N of pull force. The integrated 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78) and supports a maximum frequency of 5 cycles per second.
No, the SAIF32X75-06B has a 4M210-06 5/2 valve built directly onto the manifold. It operates from a single DC24V terminal connection. By default, the rod retracts when energised, but you can reposition the valve to extend-when-energised.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X75-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.