Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06C
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06C is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 75mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke75 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC110V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06C
The AirTAC SAIF32X75S-06C is a double-acting ISO 15552 profile cylinder with a built-in 4M210-06 5/2 solenoid valve. It features a 1/8" cylinder port and a 1/8" valve port, delivering a push force of 402N at 0.5MPa. Equipped with a magnet for position sensing, it supports CMSE reed and DMSE electronic switches. The integrated valve uses an O8xO5 PU tube manifold, eliminating the need for separate remote plumbing.
Driven by an AC110V terminal coil consuming 3.5 VA, the unit responds in 0.05s. Although the cylinder body rates to 1.0MPa, the built-in valve limits the practical working pressure to 0.15-0.8MPa. Factory-set to retract when energised, the valve can be repositioned to extend on signal, enabling true decentralized machine control from a single electrical connection.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06C Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06C |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC110V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06C
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×75 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| C | Coil voltage AC110V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06C Is Used
Decentralized Stations
Ideal for large machines with decentralized stations, the built-in valve eliminates remote plumbing and reduces panel space.
Compact Assembly
Fits space-tight machines where running separate valve tubing is difficult, driving 402N push force directly from an AC110V signal.
Retrofitting
Perfect for retrofits where adding a separate valve manifold is costly; the self-contained 5/2 valve simplifies control.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06C the Right Choice?
Choose this 32mm bore when 402N of push force at 0.5MPa is sufficient; stepping up to the 40mm bore yields 628N if your load demands it. The self-valved SAIF design excels in decentralized stations where running separate valve tubing is costly, saving panel space and wiring. The AC110V terminal connection suits standard industrial supplies.
For replacement, match the 32mm bore, 75mm stroke, 1/8" cylinder port, 4M210-06 valve, AC110V voltage, PT thread, and -S magnet. Note that the 5/2 valve routes air but does not hold the load without live pressure; for position locking, consider the SAIL series. The carbon steel rod and standard air cushions handle speeds of 30-800mm/s.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06C FAQ
The 32mm bore delivers 402N push and 345N pull force at 0.5MPa. The built-in 4M210-06 valve has a 14.0mm2 orifice with a Cv of 0.78.
It uses a 5/2 solenoid valve operating on AC110V. Factory-set to retract the rod when energised, it can be repositioned to extend-when-energised. No separate remote valve is needed.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06C
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.