Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06E
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06E is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 80mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke80 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06E
The AirTAC SAIF32X80S-06E is a double-acting ISO 15552 profile cylinder with a built-in 4M210-06 5/2 solenoid valve, offering a Cv of 0.78 and a 14.0 mm2 effective area. It is driven by an AC24V terminal coil consuming 3.5 VA, featuring IP65 protection and a 0.05 s response time. The integrated manifold connects the valve to the cylinder using O8 x O5 PU tubing, meaning the valve port is 1/8 inch while the cylinder port is PT 1/8 inch. Equipped with a magnet, it supports CMSE reed and DMSE electronic sensors for precise position detection.
Because the cylinder body rates to 1.0 MPa but the internal pilot valve operates at 0.15-0.8 MPa, the practical working range for this assembled unit is 0.15-0.8 MPa. It delivers 402 N of push force at 0.5 MPa. By default, the piston rod retracts when the coil is energised, but you can reconfigure the valve to extend-when-energised. This self-switching design eliminates remote plumbing, saving valuable panel space for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06E Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06E |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC24V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06E
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×80 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| E | Coil voltage AC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06E Is Used
Decentralized Assembly Stations
Ideal for large machines with multiple stations, using the built-in valve to actuate the 32 mm bore locally without routing long pneumatic lines back to a central manifold.
Space-Constrained Machinery
The integrated 4M210 valve and manifold block minimize the overall footprint, making it perfect for tight enclosures where a separate valve would not fit.
Retrofit Automation
Simplifies machine upgrades by providing a self-switching cylinder that requires only an electrical signal to the AC24V coil, avoiding costly new pneumatic tubing runs.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06E the Right Choice?
Choose this 32 mm bore when compact actuation is needed; if your application requires higher force, stepping up to the 40 mm bore yields 628 N of push force at 0.5 MPa. The SAIF32X80S-06E is ideal when a self-valved cylinder beats installing a separate cylinder and remote valve, as it cuts down on tubing, wiring, and assembly time. The AC24V terminal entry offers safe low-voltage control, and the PT thread ensures secure pneumatic connections.
For load holding, remember that the 5/2 valve routes air but does not lock the piston; consider the SAIL series for pneumatic locking. When replacing this unit, match the 32 mm bore, 80 mm stroke, 1/8 inch valve port, AC24V voltage, terminal entry, PT thread, and the -S magnet. The 80 mm stroke is short enough that side-load guides are not a primary concern.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06E FAQ
The 32 mm bore generates 402 N of push force and 345 N of pull force at 0.5 MPa. The built-in 4M210-06 valve has a 14.0 mm2 orifice with a Cv of 0.78, providing adequate flow for the cylinder's speed range.
It features a built-in 4M210 5/2 solenoid valve mounted directly on a manifold block. Driven by an AC24V coil, it switches itself from a single signal, meaning no remote valve is needed. By default it retracts when energised, but it can be reconfigured to extend.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06E
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.