Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06F
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06F is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 80mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke80 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC12V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06F
The AirTAC SAIF32X80S-06F is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M210-06 5/2 solenoid valve. Driven by a DC12V terminal coil drawing 3.0 W, it delivers a 0.78 Cv flow rate. The integrated manifold uses an O8 x O5 PU tube, meaning the 1/8 inch valve port differs from the cylinder's PT1/8 supply port. Because the valve operates at 0.15-0.8 MPa, this sets the practical working range for the assembly, despite the cylinder body rating to 1.0 MPa.
Generating 402N of push force at 0.5 MPa, this compact unit eliminates the need for a separate remote valve. It switches itself from a single coil signal with an IP65 protected response time of 0.05s. Factory set to retract the rod when energised, the valve can be repositioned to extend on signal. The -S magnet option supports CMSE reed and DMSE electronic sensors for precise positioning.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06F Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06F |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC12V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06F
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×80 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| F | Coil voltage DC12V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06F Is Used
Decentralized Stations
Ideal for large machines with distributed stations, minimizing panel space by integrating the valve directly onto the cylinder.
Compact Clamping
Provides 402N push force at 0.5 MPa for small part clamping in space-tight machinery without external valve plumbing.
Retrofit Automation
Simplifies machine upgrades by replacing separate cylinder and remote valve setups with a single DC12V self-switching unit.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06F the Right Choice?
Choose this 32mm bore when a compact, self-contained actuator is required for decentralized stations where running remote valve tubing is costly. If your application needs greater thrust, stepping up to the 40mm bore yields 628N of push force at 0.5 MPa. For load-holding requirements, remember the 5/2 valve routes air but does not lock the piston; consider the SAIL lock cylinder for static holding. When replacing, match the 80mm stroke, 1/8 valve port, DC12V terminal coil, PT thread, and -S magnet exactly.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06F FAQ
The 32mm bore generates 402N push and 345N pull force at 0.5 MPa. The built-in 4M210-06 valve has a 14.0 mm2 orifice with a 0.78 Cv flow rate.
By default, the DC12V coil retracts the rod when energised, but you can reposition the valve to extend on signal. The integrated valve eliminates separate tubing and panel space, enabling decentralized control from one electrical signal.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06F
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.