Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06B is a genuine double-acting ISO 15552 cylinder with a Ø40mm bore, 100mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ40 mm
- Stroke100 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06B
The AirTAC SAIF40X100S-06B is a double-acting ISO 15552 profile cylinder with an integrated 4M210-06 5/2 solenoid valve, delivering a 14.0 mm2 effective area (Cv 0.78). Driven by a DC24V terminal entry coil consuming 3.0 W, it switches itself from a single electrical signal. The assembled unit operates safely within 0.15-0.8 MPa, as the built-in valve limits the cylinder's 1.0 MPa base rating. At 0.5 MPa it generates 628N of push force and 528N of pull force.
This decentralized configuration eliminates remote plumbing and saves panel space. The manifold connects to the cylinder via PU tubing (O8 x O5), while the valve port is 1/8 (code 06) and the cylinder port is 1/4. Factory-set to retract the rod when energised, the valve can be repositioned to extend on signal. The included -S magnet enables position tracking with AirTAC CMSE reed and DMSE electronic sensors.
Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/4 |
| Rod thread | M12×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 40×100 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06B Is Used
Decentralized Assembly Stations
Ideal for large machines where routing air lines to a central manifold is costly. The built-in 4M210 valve lets this cylinder operate independently from a single DC24V signal.
Compact Material Handling
Provides 628N push force at 0.5 MPa for diverting or stopping light packages. The integrated valve footprint fits within tight conveyor frame clearances.
Retrofit Automation
Perfect for upgrading older pneumatic lines. The PT 1/8 valve port and PT 1/4 cylinder port simplify integration into existing aluminum profile structures.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06B the Right Choice?
Choose this self-valved SAIF40 unit when a compact, decentralized station beats running separate valve tubing from a main panel. If your application requires higher thrust, stepping up to the 50mm bore yields 982N push at 0.5 MPa; dropping to the 32mm bore provides 402N push for lighter duties. The DC24V terminal coil offers 3.0 W power with IP65 protection and a 0.05 s response time. Remember the 5/2 valve routes air but does not lock the load; for true position holding under pressure loss, select the SAIL lock series. When replacing, match the 40mm bore, 100mm stroke, 1/8 valve port, DC24V voltage, terminal entry, PT thread, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06B FAQ
At 0.5 MPa, this 40mm bore cylinder provides 628N push and 528N pull force. The built-in 4M210-06 5/2 valve has an effective area of 14.0 mm2 (Cv 0.78) and a maximum frequency of 5 cycles per second.
The built-in valve eliminates the need for a separate remote valve, saving panel space and tubing in decentralized installations. By factory default, the rod retracts when the DC24V coil is energised, but you can reposition the valve to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.