Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06F
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06F is a genuine double-acting ISO 15552 cylinder with a Ø40mm bore, 100mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ40 mm
- Stroke100 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC12V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06F
The AirTAC SAIF40X100S-06F is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M210-06 5/2 solenoid valve. Featuring a 1/8" valve port with a Cv of 0.78 and a 14.0 mm2 orifice, it delivers 628N of push force at 0.5 MPa. Driven by a DC12V terminal entry coil consuming 3.0W, the unit achieves IP65 protection and a rapid 0.05s activation. The integrated manifold uses an O8xO5 PU tube to bridge the valve and cylinder, meaning the 1/4" cylinder port differs from the 1/8" valve port.
Because the cylinder body rates to 1.0 MPa but the 4M210 valve operates internally, the practical working pressure for this assembled SAIF unit is 0.15-0.8 MPa. By default, the piston rod retracts when the coil is energised, but you can reconfigure it to extend-when-energised simply by repositioning the valve. This self-contained design eliminates remote plumbing, saving panel space for decentralized machine stations. The standard carbon steel rod and -S magnet option enable precise position detection with AirTAC CMSE reed or DMSE electronic sensors.
Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06F Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06F |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/4 |
| Rod thread | M12×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC12V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06F
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 40×100 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| F | Coil voltage DC12V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06F Is Used
Decentralized Assembly Stations
Eliminates the need for a remote valve island on large machines by driving the 40mm bore directly from its built-in 4M210 valve, reducing tubing runs.
Space-Constrained Automation
The integrated manifold design saves valuable panel and footprint space, fitting a 628N thrust cylinder and 5/2 valve into a single ISO 15552 envelope.
Low-Voltage Actuation
The DC12V terminal coil provides safe, low-power switching (3.0W) for sensitive environments, responding in 0.05s with IP65 protection.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06F the Right Choice?
Select this 40mm bore when your application requires around 628N push force at 0.5 MPa; if you need less holding power, step down to the 32mm bore (402N push), or move up to the 50mm bore (982N push) for heavier loads. A self-valved SAIF40X100S-06F beats a separate cylinder and remote valve when wiring and air tubing to a central panel would be costly or complex. The DC12V terminal coil is ideal for low-voltage control systems, offering 3.0W power consumption and solid-state switching safety.
When ordering a replacement, verify the 40mm bore, 100mm stroke, 1/8" valve port, DC12V voltage, terminal entry, PT thread, and -S magnet. Note that the 5/2 valve routes air but does not lock the load mechanically; for position holding without live pressure, consider the AirTAC SAIL lock or BSAI clamp-lock cylinders.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06F FAQ
At 0.5 MPa, this 40mm bore cylinder provides 628N of push force and 528N of pull force. While the cylinder body rates to 1.0 MPa, the built-in 4M210-06 valve limits the practical operating pressure to 0.15-0.8 MPa.
Yes, the factory setting retracts the rod when the DC12V coil is energised, but you can reconfigure it to extend-when-energised by repositioning the 5/2 valve on the manifold block, eliminating the need for a separate remote valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06F
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.