Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06B is a genuine double-acting ISO 15552 cylinder with a Ø50mm bore, 100mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ50 mm
- Stroke100 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06B
The AirTAC SAIF50X100S-06B is a double-acting ISO 15552 profile cylinder featuring an integrated 4M210-06 5/2 solenoid valve. Equipped with a -S magnet for CMSE reed and DMSE electronic sensors, it delivers 982N of push thrust at 0.5 MPa. The bundled DC24V terminal coil draws just 3.0 W, energising in 0.05 s to drive the actuator directly without a remote valve island.
Because the cylinder body rates to 1.0 MPa but the internal pilot valve operates at 0.15-0.8 MPa, the practical working range for this assembled unit is 0.15-0.8 MPa. The manifold connects via an O8xO5 PU tube, and the factory setting retracts the rod when the coil energises; you can reposition the valve to extend-when-energised if your sequence requires it.
Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/4 |
| Rod thread | M16×1.5 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 50×100 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06B Is Used
Decentralized Machine Stations
Eliminates the need for a central valve bank by driving the cylinder directly from a single DC24V signal at the station.
Space-Constrained Automation
The integrated manifold block saves valuable panel and footprint space in compact assembly machinery.
Sensor-Ready Positioning
The -S magnet works seamlessly with AirTAC CMSE and DMSE switches for precise end-of-stroke detection.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06B the Right Choice?
Choose this self-valved SAIF50X100S-06B for decentralized stations where routing pneumatic tubing from a main panel is costly. Stepping down to a 40mm bore drops the 0.5 MPa push force to 628N, while an 80mm bore raises it to 2513N. The built-in 5/2 valve routes air but does not lock the load; for position holding, consider an AirTAC SAIL lock cylinder. To replace this unit, match the 50mm bore, 100mm stroke, PT1/8 valve port, DC24V terminal coil, PT thread, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06B FAQ
At 0.5 MPa, the 50mm bore provides 982N of push force and 825N of pull force. The built-in 4M210-06 valve has a 14.0 mm2 effective area (Cv 0.78) and a maximum frequency of 5 cycles per second.
The factory setting retracts the piston rod when the coil is energised. Because the integrated 5/2 valve holds position by internal pilot pressure rather than a spring, you can reposition the valve to extend-when-energised if needed.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.