Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000S-10A is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 1000mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke1000 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000S-10A
The AirTAC SAIF63X1000S-10A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. Equipped with a magnet for position sensing, it is designed for decentralized automation where running separate valve tubing is costly. The manifold links the valve to the cylinder using PU tubing (O10 x O6.5), meaning the 3/8 inch valve port and 3/8 inch cylinder port are distinct connections that must not be confused during installation.
This assembly is driven by an AC220V terminal-entry coil drawing 3.5 VA, featuring IP65 protection and a rapid 0.05s activation time. Because the built-in valve operates at 0.15-0.8 MPa, the practical working range for the assembled SAIF unit is 0.15-0.8 MPa, even though the bare cylinder rates to 1.0 MPa. Delivering a push force of 1559N at 0.5 MPa, the factory valve setting retracts the rod when the coil is energised, but it can be reconfigured to extend-when-energised by simply repositioning the valve.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×1000 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000S-10A Is Used
Decentralized Automation
Ideal for large factory layouts where routing individual air lines to a central valve bank is inefficient, allowing each station to control itself from one coil signal.
Extended Stroke Handling
Suitable for long-travel material handling or lifting tasks up to 1000mm, provided external guidance is used to mitigate rod side-loading on the profile cylinder.
Space-Constrained Retrofits
Perfect for machine upgrades where panel space is at a premium, integrating the 4M310 valve directly onto the cylinder to minimize the overall footprint.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000S-10A the Right Choice?
Choose this self-valved SAIF63 unit to eliminate remote valve panels and drastically reduce plumbing space across large machines. If your application requires less force, stepping down to a 50mm bore yields 982N of push force at 0.5 MPa; if you need more power, an 80mm bore provides 2513N at the same pressure. For load-holding requirements, remember that neither the 5/2 valve nor the adjustable air cushions act as a brake—consider the SAIL lock cylinder or BSAI clamp-lock series instead.
When replacing this assembly, match the 63mm bore, 1000mm stroke, 3/8 inch valve port, AC220V terminal coil, PT tapered threads, and the -S magnet. Because the stroke is 1000mm, carefully manage side loads by using external guide rails to prevent rod damage and ensure smooth operation across the full travel distance.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000S-10A FAQ
The 63mm bore generates a push force of 1559N and a pull force of 1402N at 0.5 MPa. The built-in 4M310-10 valve provides an effective flow area of 30.0 mm2 (Cv 1.68) to drive these movements.
No, the 5/2 valve routes air but does not lock the load without live pressure. By factory default, the piston rod retracts when the AC220V coil is energised; this can be changed to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.