Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10A is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 150mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke150 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10A
The AirTAC SAIF63X150S-10A is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M310-10 5/2 solenoid valve. Delivering a Cv of 1.68 and a 30 mm2 effective orifice, the integrated valve manifold uses O10 x O6.5 PU tubing to drive the 63 mm bore. It generates 1559 N of push force at 0.5 MPa. This specific SKU features a PT3/8 cylinder port, a PT3/8 valve port, an AC220V terminal coil drawing 3.5 VA, and an -S magnet for CMSE or DMSE position sensing.
Because the built-in valve operates at 0.15-0.8 MPa, the practical working range for the assembled SAIF unit is 0.15-0.8 MPa, even though the bare cylinder rates to 1.0 MPa. The factory setting retracts the carbon steel piston rod when the coil energises, but you can reposition the valve to extend-when-energised. It switches itself from one coil signal, eliminating remote plumbing and making it ideal for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×150 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10A Is Used
Decentralized Assembly Stations
Eliminates the need for long valve tubing runs by integrating the 4M310 valve directly on the 63 mm cylinder for localized control.
Space-Constrained Machinery
Saves valuable panel space by removing the remote valve bank, driving the 1559 N push load directly from a single AC220V terminal signal.
Retrofit Automation Upgrades
Ideal for upgrading existing ISO 15552 machines where running new pneumatic tubing to a central manifold is costly and complex.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10A the Right Choice?
Choose this 63 mm bore when a 50 mm bore (982 N push at 0.5 MPa) is insufficient, but a 80 mm bore (2513 N push at 0.5 MPa) would be excessive. A self-valved SAIF beats a separate cylinder plus a remote valve when you need to minimize panel space and wiring across decentralized stations. For load-holding applications, note that the 5/2 valve routes air but does not lock the load; consider AirTAC SAIL or BSAI for clamp-lock requirements. At 150 mm stroke, side-load is moderate, but always ensure proper guide alignment to prevent premature seal wear.
When ordering a replacement, verify the 63 mm bore, 150 mm stroke, PT3/8 valve port, AC220V voltage, terminal electrical entry, PT thread standard, and the -S magnet option. The valve max frequency is 4 cycles per second, and the coil responds in 0.05 s with IP65 protection.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10A FAQ
The 63 mm bore generates 1559 N push and 1402 N pull force at 0.5 MPa. The built-in 4M310-10 valve provides a 30 mm2 effective area (Cv 1.68) for optimal air flow.
The built-in 5/2 valve allows the cylinder to switch itself from one AC220V coil signal without a separate remote valve. By factory default, the rod retracts when energised, but you can reposition the valve to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.