Airtac SAIF Series Standard Cylinder with Valve SAIF63X200S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X200S-10A is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 200mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke200 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X200S-10A
The AirTAC SAIF63X200S-10A is a double-acting ISO 15552 profile cylinder featuring a built-in 4M310-10 5/2 solenoid valve. This specific valve provides a 30.0 mm2 effective orifice (Cv 1.68) and is paired with an AC220V coil drawing 3.5 VA, wired via a terminal entry with IP65 protection. The integrated manifold uses PU tubing (O10 x O6.5) to bridge the valve and cylinder, meaning the valve port (3/8) and cylinder port (3/8) are distinctly plumbed within the assembly. Because the valve operates at 0.15-0.8 MPa, the practical working pressure for the assembled SAIF unit is 0.15-0.8 MPa, despite the bare cylinder rating of 1.0 MPa.
In this configuration, the piston rod retracts when the coil is energised, but you can reconfigure it to extend-when-energised by simply repositioning the valve. The 63mm bore generates 1559N of push force at 0.5 MPa, making it a robust mid-range actuator. Fitted with a magnet (-S), it supports AirTAC CMSE reed and DMSE electronic sensors for precise position tracking. This self-switching design eliminates the need for a separate remote valve, reducing panel space and tubing runs for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X200S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X200S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X200S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×200 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X200S-10A Is Used
Decentralized Assembly Lines
Eliminates the need for a central valve bank, allowing individual stations to control their own clamping actions directly from the cylinder.
Mid-Force Positioning
Provides 1559N of push force at 0.5 MPa, suitable for driving medium-sized tooling or lifting fixtures in tight machine envelopes.
Retrofit Automation
Ideal for upgrading older machines where adding new pneumatic tubing to a remote valve manifold is structurally difficult or expensive.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X200S-10A the Right Choice?
Choose this 63mm bore when a 50mm bore (982N push at 0.5 MPa) lacks the force for your load, but an 80mm bore (2513N push) would be excessive overkill. The SAIF63X200S-10A is ideal for decentralized stations where running separate valve tubing is costly or space-prohibitive. It switches itself from a single AC220V terminal signal, operating at up to 4 cycles per second. If your application requires holding a load without live pressure, note that the 5/2 valve routes air but does not lock the piston; for true load-holding, consider the SAIL (lock) or BSAI (clamp-lock) series. When ordering a replacement, verify the 200mm stroke, PT3/8 cylinder port, PT3/8 valve port, AC220V voltage, terminal entry, and the -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X200S-10A FAQ
The 63mm bore generates 1559N of push force and 1402N of pull force at 0.5 MPa. The built-in 4M310-10 valve has an effective area of 30.0 mm2 (Cv 1.68) and supports a maximum frequency of 4 cycles per second.
By factory default, the rod retracts when the AC220V coil is energised, but this can be reconfigured to extend-when-energised by repositioning the valve. No separate remote valve is needed, as the integrated 5/2 valve switches the cylinder directly from one electrical signal.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X200S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.