Airtac SAIF Series Standard Cylinder with Valve SAIF63X75-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X75-10B is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 75mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke75 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X75-10B
The AirTAC SAIF63X75-10B is a double-acting ISO 15552 profile cylinder paired with a built-in 4M310-10 5/2 solenoid valve. This integrated manifold block uses a PU tube (O10 x O6.5) to bridge the valve and cylinder, eliminating the need for remote pneumatic plumbing. Driven by a DC24V terminal coil drawing 3.0 W, it responds in 0.05 s and carries an IP65 rating. The valve provides a 30.0 mm2 effective area (Cv 1.68) and switches at up to 4 cycles per second.
Because the 4M310 valve operates at 0.15-0.8 MPa, the practical working range for the assembled SAIF unit is 0.15-0.8 MPa, even though the bare cylinder rates to 1.0 MPa. At 0.5 MPa this 63 mm bore generates 1559 N of push force and 1402 N of pull force. The factory setting retracts the rod when the coil is energised, but you can reposition the valve to extend-when-energised. This self-contained design requires only a single electrical signal to operate, making it ideal for decentralized stations across large machines.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X75-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X75-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X75-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×75 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X75-10B Is Used
Decentralized Assembly Stations
Eliminates long tubing runs from a central valve island by switching locally via the DC24V terminal coil, saving panel space on large multi-station machines.
Mid-Force Actuation
Delivers 1559 N push force at 0.5 MPa, fitting perfectly between 50 mm and 80 mm bores for clamping, lifting, or pressing medium-weight workpieces.
Space-Constrained Retrofits
Ideal for upgrading older machines where routing new pneumatic lines to a remote valve is costly or physically impossible, using the integrated 4M310-10 manifold.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X75-10B the Right Choice?
Choose this 63 mm bore when a 50 mm bore (982 N push at 0.5 MPa) is insufficient, but a 80 mm bore (2513 N push at 0.5 MPa) would be overkill. The SAIF63X75-10B is specified with a PT3/8 cylinder port, a 1/4 valve port (code 10), DC24V voltage, terminal entry, and no magnet (-S omitted). It replaces a separate cylinder plus remote valve setup, drastically reducing panel space and wiring complexity for decentralized installations.
Remember that the built-in 5/2 valve routes air but does not lock the load without live pressure; for true position holding under loss of air, consider the SAIL lock or BSAI clamp-lock series. When ordering replacements, verify the 75 mm stroke, 3/8 cylinder port, 1/4 valve port, DC24V coil, terminal entry, PT thread, and carbon steel rod material.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X75-10B FAQ
The cylinder delivers 1559 N push and 1402 N pull force at 0.5 MPa. The built-in 4M310-10 valve has a 30.0 mm2 effective area (Cv 1.68) and a maximum frequency of 4 cycles per second.
No, the SAIF63X75-10B controls itself using the built-in 4M310 valve. By default the rod retracts when the DC24V coil is energised, but you can reposition the valve to extend-when-energised. It requires only one coil signal to cycle.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X75-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.