Airtac SAIF Series Standard Cylinder with Valve SAIF63X80-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X80-10A is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 80mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke80 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X80-10A
The AirTAC SAIF63X80-10A is a double-acting ISO 15552 profile cylinder with a built-in 4M310-10 5/2 solenoid valve, delivering a 1.68 Cv flow rate. Driven by an AC220V terminal coil drawing 3.5 VA, it eliminates the need for a remote valve island. The integrated manifold uses O10 x O6.5 PU tubing to bridge the 3/8 inch cylinder port and the 3/8 inch valve port.
Because the 5/2 valve operates at 0.15-0.8 MPa, this sets the practical working range for the assembled unit, even though the cylinder body itself rates to 1.0 MPa. From the factory, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised. This self-switching design cuts tubing runs and panel space, making it ideal for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X80-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X80-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 80 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X80-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×80 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X80-10A Is Used
Decentralized Assembly Lines
Eliminates long tubing runs from a central panel by switching directly at the station, reducing response lag and installation complexity.
Mid-Force Clamping Fixtures
Provides reliable 1559N clamping force at 0.5 MPa for machining cells where space constraints prevent mounting a separate valve.
Machine Retrofitting
Ideal for upgrading older pneumatics where adding dedicated valve manifolds is cost-prohibitive, using the integrated 4M310 valve instead.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X80-10A the Right Choice?
Choose this 63mm bore when you need substantial thrust—1559N push and 1402N pull at 0.5 MPa. If your application requires less force, stepping down to a 50mm bore yields 982N push at 0.5 MPa, while moving up to an 80mm bore provides 2513N. The AC220V terminal connection suits standard plant wiring, and the PT threaded ports match common regional fittings.
Remember that the built-in 5/2 valve routes air but does not lock the load; if you need true load-holding, consider the SAIL lock variant. When replacing this unit, match the 63mm bore, 80mm stroke, 10 (3/8 inch) valve port, AC220V voltage, terminal entry, and PT thread. Because it lacks the -S magnet, it cannot host CMSE or DMSE sensors without modification.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X80-10A FAQ
At 0.5 MPa, this 63mm bore cylinder provides 1559N of push force and 1402N of pull force. If operating at 0.7 MPa, the push force increases to 2182N.
It requires one AC220V electrical signal to the terminal coil. The integrated 4M310 5/2 valve handles the air routing directly, and by default, the rod retracts when energised, though this can be reconfigured to extend.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X80-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.