Airtac SAIF Series Standard Cylinder with Valve SAIF80X175-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF80X175-10B is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 175mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke175 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF80X175-10B
The AirTAC SAIF80X175-10B is a double-acting ISO 15552 profile cylinder with a built-in 4M310-10 5/2 solenoid valve, delivering a 30.0 mm2 orifice (Cv 1.68) for high flow. Driven by a DC24V terminal coil drawing 3.0 W with IP65 protection and a 0.05 s response time, it eliminates the need for a separate remote valve. Because the valve operates at 0.15-0.8 MPa, this defines the practical working pressure range for the assembled unit, even though the bare cylinder rates to 1.0 MPa.
This 80mm bore generates 2513 N of push force at 0.5 MPa and uses a carbon steel rod with PT 3/8 cylinder ports. The integrated manifold connects to the valve via PU tubing (O10 x O6.5). Factory-set to retract the rod when the coil is energised, the valve can be repositioned to extend-when-energised if your sequence requires it. One coil signal switches the cylinder, making it ideal for decentralized installations across large machines.
Airtac SAIF Series Standard Cylinder with Valve SAIF80X175-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF80X175-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF80X175-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 80×175 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF80X175-10B Is Used
Decentralized Automation Cells
Ideal for large factory layouts where running pneumatic tubing to a central valve island is impractical, allowing local DC24V control of heavy 80mm actuators.
High-Force Clamping
Provides robust 2513 N clamping force at 0.5 MPa directly at the workstation without needing external valve plumbing.
Compact Machine Retrofits
Drops a high-flow 4M310 valve and cylinder into a tight envelope, saving valuable panel space while delivering 4523 N at 0.9 MPa.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF80X175-10B the Right Choice?
Select this 80mm model when your application demands high thrust (up to 4523 N push at 0.9 MPa) but you want to avoid the tubing and panel space of a remote valve bank. If you need less force, the 63mm bore offers 1559 N push at 0.5 MPa; if you need more, the 100mm bore provides 3927 N at 0.5 MPa. The self-contained SAIF design is superior for decentralized stations where routing air lines back to a main manifold is costly, as the DC24V terminal wire is all that is needed to control the actuator.
When ordering a replacement, match the 80mm bore, 175mm stroke, PT 3/8 cylinder port, 4M310-10 valve port, DC24V voltage, terminal entry, and standard carbon steel rod. Note that the built-in 5/2 valve routes air but does not lock the load mechanically; for position holding, consider the SAIL series. Since this unit lacks a magnet, it cannot host CMSE or DMSE sensors.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF80X175-10B FAQ
The 80mm bore produces 2513 N push and 2268 N pull force at 0.5 MPa. The built-in 4M310-10 valve has a 30.0 mm2 effective area (Cv 1.68) and a maximum frequency of 4 cycles per second.
Yes, the factory setting retracts the rod when the DC24V coil is energised, but you can reposition the 5/2 valve to extend-when-energised. The built-in valve eliminates separate remote valves, reducing plumbing and panel space for decentralized control.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF80X175-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.