Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10B is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 600mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke600 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10B
The AirTAC SAIF80X600S-10B is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. Delivering a 2513N push force at 0.5 MPa and utilizing a carbon steel rod with a magnet for CMSE or DMSE sensors, it controls itself from a single DC24V terminal entry coil signal. The built-in valve offers a 30.0 mm2 orifice (Cv 1.68) and operates at 0.15-0.8 MPa, which sets the practical working pressure for the assembled unit.
By default, the factory setting retracts the piston rod when the coil is energised, but you can reconfigure it to extend-when-energised by simply repositioning the valve. This self-contained design eliminates the need for a remote valve, reducing PU tubing and panel space, which is ideal for decentralized stations across large machines. The manifold uses O10 x O6.5 PU tubing, and the valve port (3/8") is distinct from the cylinder port (3/8").
Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 600 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 80×600 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10B Is Used
Decentralized Automation
Perfect for large machine layouts where running valve tubing from a central panel is costly, using a single DC24V signal to actuate the 600mm stroke directly at the station.
High-Force Clamping
Provides 2513N of push force at 0.5 MPa for securing heavy workpieces, with the integrated 4M310-10 valve ensuring rapid 4 cycle/sec actuation.
Space-Constrained Retrofitting
Ideal for upgrading existing lines where panel space is limited, as the built-in valve manifold eliminates the need for external valve banks and long PU tube runs.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10B the Right Choice?
Choose this 80mm bore when a 63mm bore falls short—stepping up from the 63mm bore (1559N push at 0.5 MPa) to this 80mm bore yields 2513N of push force. The integrated 4M310 valve provides ample flow for the 600mm stroke, but because the stroke exceeds 300mm, you must account for side loads and use appropriate guide rails to prevent rod binding. The self-valved architecture beats a separate cylinder and remote valve in space-tight machines by cutting wiring and plumbing.
This unit uses a DC24V terminal coil (3.0 W, IP65, 0.05s response) with PT tapered threads. It is a double-acting cylinder driven by a 5/2 valve that holds its last position via pilot pressure; it does not lock or hold loads without live air, so for load-holding applications consider the SAIL series. Replacement requires matching the 80mm bore, 600mm stroke, 3/8" valve port, DC24V voltage, terminal entry, PT thread, and the -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10B FAQ
The 80mm bore generates 2513N push and 2268N pull force at 0.5 MPa. The built-in 4M310-10 5/2 valve has an effective area of 30.0 mm2 (Cv 1.68) and a maximum frequency of 4 cycles per second.
The 5/2 valve routes air and holds its last position by pilot pressure, but it is not a lock; the cylinder will not hold a load without live pressure. It uses a DC24V terminal coil (3.0 W, IP65), and by factory default, the rod retracts when energised, which can be reconfigured to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF80X600S-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.