Airtac SAIF Series Standard Cylinder with Valve SAIF80X900-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF80X900-10A is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 900mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke900 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF80X900-10A
The AirTAC SAIF80X900-10A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This specific build uses a PT3/8 cylinder port and a 1/4 valve port, delivering a Cv of 1.68. Driven by an AC220V terminal entry coil that consumes 3.5 VA, it activates in 0.05 seconds. Although the cylinder body rates to 1.0 MPa, the practical operating range for this valved assembly is 0.15-0.8 MPa. It delivers robust thrust, pushing 4523N at 0.9 MPa.
By default, the piston rod retracts when the coil is energised, but you can reconfigure it to extend-when-energised by repositioning the valve. The manifold connects the valve to the cylinder using O10 x O6.5 PU tubing. Because it switches itself from one coil signal, you eliminate remote plumbing and panel space, making it ideal for decentralized installation across large machines.
Airtac SAIF Series Standard Cylinder with Valve SAIF80X900-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF80X900-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 900 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF80X900-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 80×900 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF80X900-10A Is Used
Decentralized Automation
Perfect for large factory lines where running remote valve tubing is costly, letting each station control its own heavy push action locally.
Heavy Pressing
Provides 4523N of push force at 0.9 MPa for pressing or clamping components securely during precision manufacturing tasks.
Space-Tight Machines
Eliminates the need for a separate valve panel by integrating the 4M310 valve directly on the cylinder, saving critical envelope space.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF80X900-10A the Right Choice?
Choose this 80mm bore if you need heavy thrust up to 4523N at 0.9 MPa; stepping down to a 63mm bore yields 2805N, while a 100mm bore offers 7068N. A self-valved SAIF beats a separate cylinder plus remote valve when you want to minimize tubing and wiring across decentralized stations. Remember that the 5/2 valve routes air but does not lock the load; for position holding, consider a SAIL lock or BSAI clamp-lock cylinder. For replacement, match the 80mm bore, 900mm stroke, 1/4 valve port, AC220V voltage, terminal entry, PT thread, and no magnet. At 900mm stroke, use a guide to prevent side-load damage.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF80X900-10A FAQ
At 0.9 MPa, this 80mm bore cylinder generates a push force of 4523N and a pull force of 2268N. The integrated 4M310-10 valve provides a Cv of 1.68 to drive these heavy loads.
It uses an AC220V terminal entry coil. The factory setting retracts the rod when energised, but you can reposition the valve to extend-when-energised. It requires no separate remote valve, simplifying wiring.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF80X900-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.