Airtac SAIJ160 Adjustable Cylinder SAIJ160BX475-10S
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160BX475-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 475mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke475 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX475-10S
The AirTAC SAIJ160X475-10-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 465 to 475 mm, allowing precise end-position tuning without adding external stops. Equipped with a SUS304 stainless steel rod, it is ideal for environments requiring high corrosion resistance. The PT G3/4 port and 50 mm cushion deliver reliable deceleration for heavy loads.
This model delivers substantial thrust, generating 14074 N of push force at 0.7 MPa and reaching 18095 N at 0.9 MPa. The integrated magnet supports position sensing via CMSE reed or DMSE electronic switches. Its extruded aluminum barrel includes sensor grooves on both sides, and the mounting interface is dimensionally interchangeable with ISO 15552 standards.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX475-10S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX475-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX475-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX475-10S Is Used
Heavy Fabrication Positioning
Dial in the exact 465-475 mm end-stop during equipment setup to accommodate varying material thicknesses without mechanical rework.
Product Changeover Systems
Quickly adjust the retract end position on packaging lines when switching to different product sizes, minimizing downtime.
Press Stroke Tuning
Fine-tune the final 10 mm of travel on a pressing assembly to compensate for tooling wear while maintaining full thrust.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX475-10S the Right Cylinder?
Choose this 160 mm bore when 10053 N at 0.5 MPa is insufficient, or step down to a 125 mm bore if 6136 N is enough for your application. An adjustable stroke is selected over a fixed SAI when a machine requires a variable end-stop for product changeovers or commissioning fine-tuning. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for true load-holding without pressure, consider the SAIL or BSAI series.
Because the 475 mm stroke is substantial, the 40 mm rod diameter handles significant side loads, but an external guide is recommended for unsupported lengths. This SAIJ configuration includes a PT tapered port, a SUS304 rod, and an -S magnet. It uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR options.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX475-10S FAQ
It provides 10053 N push and 9425 N pull at 0.5 MPa. At 0.9 MPa, the push force reaches 18095 N, with a maximum operating pressure of 1.0 MPa.
The rear adjuster screw allows you to shorten the 475 mm nominal stroke by up to 10 mm, creating a 465-475 mm travel window. It functions as a hard stop and does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX475-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.