Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 60mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke60 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10
The AirTAC SAIJ160X60-10 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 50 to 60 mm for precise end-position tuning. Built with an extruded aluminum barrel, it delivers robust thrust, generating 10053 N of push force and 9425 N of pull force at 0.5 MPa. This model features a SUS304 stainless steel rod for superior corrosion resistance and operates at speeds between 30 and 500 mm/s.
A key benefit of this adjustable-stroke design is the ability to fine-tune the retract position at commissioning without swapping hardware or adding external stops. The rear screw acts purely as a travel stop and works alongside standard variable air cushions at both ends to manage deceleration. It does not hold the load without live air pressure; for load-holding requirements, consider the SAIL or BSAI variants.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10 Is Used
Heavy Press Tuning
Dial in the exact 50 to 60 mm clamping depth on heavy presses during setup, ensuring perfect material compression without external stopper blocks.
Product Size Changeover
Quickly adjust the retract end-position by up to 10 mm when switching between product variants on a high-force assembly line.
Corrosive Heavy Automation
Leverage the 10053 N push force and SUS304 stainless steel rod in humid or washdown heavy-duty manufacturing environments.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10 the Right Cylinder?
Selecting the SAIJ160X60-10 is ideal when a heavy-force cylinder needs exact end-stop dialing during product changeovers, stepping up from a bore 125 that provides 6136 N at 0.5 MPa. Because the 60 mm stroke is relatively short, side-loading is less of a concern, but the robust 40 mm SUS304 rod handles greater lateral stress than smaller bores. If your application requires the cylinder to maintain its position without continuous air supply, this standard SAIJ is insufficient as its adjuster is a stop, not a lock. To ensure exact ISO 15552 dimensional interchangeability, verify the PT port threads, 50-60 mm usable travel, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10 FAQ
At an operating pressure of 0.5 MPa, this 160 mm bore cylinder provides a push force of 10053 N and a pull force of 9425 N. It can reach a maximum push force of 18095 N at 0.9 MPa.
The rear adjuster screw allows you to shorten the 60 mm nominal stroke by up to 10 mm, creating a 50 to 60 mm usable travel window. It functions as a mechanical stop for end-position tuning and is not a locking device.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.