Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10S
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 60mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke60 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10S
The AirTAC SAIJ160X60-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling a usable travel window of 50 to 60 mm for precise end-position tuning. Built with a SUS304 stainless steel rod and a PT tapered port, it delivers substantial thrust, generating 10053 N of pull force at 0.5 MPa and up to 18095 N at 0.9 MPa. The integrated -S magnet supports position sensing via CMSE reed or DMSE electronic switches.
Because the rear adjuster acts purely as a mechanical stop to set the travel end, it does not lock or hold the load without continuous live air pressure. The extruded aluminum barrel features sensor grooves on both sides, and the mounting options cover Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR configurations.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10S Is Used
Press Stroke Calibration
Dial in the exact 50 to 60 mm travel distance during machine setup to accommodate varying material thicknesses without installing external stopper blocks.
Product Size Changeover
Quickly fine-tune the retract end position on a packaging line when switching to a new product format, using the rear screw to shorten the effective stroke by up to 10 mm.
Heavy Assembly Positioning
Leverage the 10053 N pull force at 0.5 MPa to position heavy components accurately, relying on the SUS304 rod for durability in harsh industrial environments.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10S the Right Cylinder?
Selecting this 160 mm bore adjustable cylinder is ideal when a machine requires exact end-stop calibration during commissioning or product changeover, avoiding the need to swap out a fixed-stroke SAI cylinder. If your application demands less force, stepping down to a 125 mm bore yields 5734 N of pull at 0.5 MPa; conversely, moving up to a 200 mm bore provides 15080 N of pull. To replace this unit under ISO 15552 interchangeability, match the 160 mm bore, 60 mm stroke, 10 mm adjustment, PT G3/4 port, and the -S magnet requirement.
For load-holding applications without live air pressure, this cylinder is insufficient since the rear adjuster only trims travel distance and the air cushions manage deceleration. You must direct your design toward an SAIL air-released lock, a BSAI clamp-lock, or an external pilot-operated check valve for secure load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10S FAQ
At 0.5 MPa operating pressure, this 160 mm bore cylinder provides 10053 N of pull force and 14074 N of push force. At the maximum operating pressure of 1.0 MPa, it delivers a maximum push force of 2050 kgf.
The rear adjuster screw allows you to mechanically shorten the 60 mm nominal stroke by up to 10 mm, creating a usable travel window of 50 to 60 mm. This adjuster functions only as a travel stop to fine-tune the end position and does not lock or hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.