Airtac SAIJ160 Adjustable Cylinder SAIJ160BX600-75
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160BX600-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 600mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke600 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX600-75
The AirTAC SAIJ160X600-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 525 to 600 mm usable travel window. Delivering 9425 N of pull force at 0.5 MPa, it handles heavy loads while allowing you to fine-tune the retract end position during commissioning without swapping out the unit.
This 160 mm bore model uses a robust 40 mm SUS304 stainless steel rod and a PT G3/4 port. The external rear screw acts purely as a travel stop for deceleration, so it will not hold the load without live air pressure; for true load-holding, consider the SAIL or BSAI series.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX600-75 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX600-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX600-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX600-75 Is Used
Heavy Press Tuning
Dial in the exact 525 to 600 mm end-position on large assembly presses during product changeover without adding external mechanical stops.
Large Material Handling
Adjust the retract distance for varying pallet sizes on heavy-duty conveyors, using the 40 mm SUS304 rod to withstand harsh environments.
Automated Machine Setup
Fine-tune the stroke end-stop during initial commissioning to absorb mechanical tolerances in large-scale fabrication equipment.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX600-75 the Right Cylinder?
Choose this adjustable-stroke model when your machine setup requires variable end-stops or product changeover flexibility, avoiding the need to maintain multiple fixed-stroke SAI cylinders. If your application needs less force, stepping down to a 125 mm bore yields 5734 N of pull force at 0.5 MPa.
Because the 600 mm stroke is long, the 40 mm rod still requires an external guide to prevent excessive side-loading. For ISO 15552 replacement matching, specify 160 mm bore, 600 mm stroke, 75 mm adjustment, PT G3/4 port, Basic/FA/LB/TC/FTC/TCM1/TCM2 mounting, and no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX600-75 FAQ
At 0.5 MPa operating pressure, this 160 mm bore cylinder provides 10053 N of push force and 9425 N of pull force. It can reach up to 18095 N push at 0.9 MPa.
The rear adjuster screw lets you shorten the 600 mm nominal stroke by up to 75 mm, creating a 525 to 600 mm travel window. It functions only as an end-stop and does not lock the load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX600-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.