Airtac SAIJ160 Adjustable Cylinder SAIJ160BX95-10S
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160BX95-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 95mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke95 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX95-10S
The AirTAC SAIJ160X95-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the nominal 95 mm travel back by up to 10 mm, creating a precise 85-95 mm usable window. Delivering 18095 N of push force at 0.9 MPa, it handles heavy linear loads while maintaining standard dimensional interchangeability per ISO 15552.
This configuration includes a SUS304 stainless steel rod for superior corrosion resistance and a built-in magnet for position sensing via AirTAC CMSE reed or DMSE electronic switches. The extruded aluminum barrel incorporates sensor grooves on both sides, and the PT tapered ports ensure a robust pneumatic connection for high-flow demands.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX95-10S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX95-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX95-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX95-10S Is Used
Heavy Press Fine-Tuning
Dial in the exact 85-95 mm retract position during heavy press commissioning without machining new external stopper blocks.
Product Size Changeover
Quickly adapt the end-of-stroke position on automated lines when switching between different product heights or formats.
High-Force Positioning
Move heavy jigs or assemblies using 18095 N of thrust while relying on the rear screw to set precise machine home positions.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX95-10S the Right Cylinder?
Choose this 160 mm bore when you need substantial thrust—18095 N at 0.9 MPa—stepping up from a 125 mm bore that provides 11045 N, or down from a 200 mm bore delivering 28274 N. The adjustable stroke is ideal for machine commissioning or product changeover, letting you fine-tune the retract end position without swapping cylinders or adding external stops.
For ISO 15552 replacement matching, specify bore 160, stroke 95, adjustment 10, PT port thread, and the -S magnet. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding, consider the SAIL or BSAI series. Even at 95 mm, always guide the load to prevent excessive side-loading on the M36x2 rod thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX95-10S FAQ
The rear adjuster screw acts as a mechanical stop that lets you shorten the 95 mm nominal stroke by up to 10 mm, providing an effective 85-95 mm travel window. It sets the end position but does not lock or hold the load without continuous air pressure.
At an operating pressure of 0.9 MPa, this 160 mm bore double-acting cylinder generates a push force of 18095 N and a pull force of 9425 N, with a maximum thrust of 2050 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX95-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.