Airtac SAIJ160 Adjustable Cylinder SAIJ160X10-10
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160X10-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 10mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke10 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160X10-10
The AirTAC SAIJ160X10-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 0-10 mm, allowing you to dial in the exact end position without swapping the hardware. Built with a robust 40 mm carbon steel rod and M36x2 thread, it handles high side loads effectively. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches.
Delivering 10053 N of pull force at 0.5 MPa, this bore size is built for heavy-duty clamping and pressing. The rear stopper functions strictly as a travel limiter to fine-tune the retraction point; it is not a lock and will not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X10-10 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160X10-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160X10-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160X10-10 Is Used
Pressing Operations
Dial in the exact 0-10 mm travel for high-force pressing and forming tasks where a fixed 10 mm stroke lacks the necessary end-position flexibility.
Machine Changeover
Quickly adjust the retraction stop during product size transitions on the line, saving time compared to physically replacing the cylinder.
Heavy Clamping
Leverage the 10053 N pull force to secure heavy workpieces, using the rear adjuster to set the precise clamping depth without over-travel.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160X10-10 the Right Cylinder?
Choose this 160 mm bore when your application requires massive force that a 125 mm bore cannot provide, as the 125 mm tops out at 5734 N pull at 0.5 MPa. The adjustable stroke is ideal for applications requiring precise setup during commissioning or frequent product changeovers, replacing fixed-stroke SAI cylinders. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options. To match an ISO 15552 replacement, verify the 10 mm stroke, 10 mm adjustment, PT port, and desired mounting accessory.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X10-10 FAQ
At 0.5 MPa, the SAIJ160X10-10 provides 10053 N of pull force and 14074 N of push force. It can reach a maximum push force of 18095 N at 0.9 MPa.
The rear adjuster allows you to shorten the 10 mm nominal stroke by up to 10 mm, creating a 0-10 mm usable travel window. This stopper sets the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160X10-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.